Acti 9 - Auxiliary contact alarm SD ac dc - A9N26927
This Acti 9 SD electric auxiliary is a remote fault indicator contact.
It is dedicated to Acti 9 C120, C60H-DC, DPN N Vigi.
It comes with 1 changeover contact indicating the position of the associated device.
It indicates the position of the associated device in the event of electrical fault or action on the tripping auxiliary.
The width in 9mm pitches is 1.
The Ue rated operational voltage is 24VAC to 415VAC or 24VDC to 130VDC.
The operating frequency is 50Hz or 60Hz.
The Ie rated operational current is 6A under 24VDC, 2A under 48VDC, 1.5A under 60VDC, 1A under 130VDC.
The Ie rated operational current is 6A under 24VAC to 240VAC, 3A under 415VAC.
There is a mechanical state indicator and a test function button on the front face.
Be careful, this device is not compatible with an ID residual current circuit breaker.
The operating temperature is -25°C to + 50°C.
The storage temperature is -40°C to + 85°C.
This product complies with IEC/EN 60947-5-1 standard and EN 62019-2 standard only for C120.
| Attribute | Value |
|---|---|
| SKU | A9N26927 |
| product certifications | ASEFA, ASTA, LCIE, KEMA |
| ambient air temperature for storage | -40-85 °C |
| pollution degree | 3 conforming to EN/IEC 60947-5-1 |
| ambient air temperature for operation | -25-50 °C |
| range of product | C60, C120, ID, DPN, DPN Vigi, Clario, Librio, ProDis, I-NA |
| product or component type | Miniature Circuit Breaker |
| net weight | 30 g |
| mounting mode | fixed |
| standards | EN/IEC 60947-5-1 |
| tropicalisation | 2 conforming to EN/IEC 60947-5-1 |
| device short name | SD |
| range | Aksesoris |
| wire stripping length | 9 mm |
| product compatibility | iDPN, IDc, C60, DT60, DT40, DPN Vigi, ID C40, C40, ITG40, C120, C60PV-DC, SW60-DC, C120NA-DC, C60NA-DC, C60H-DC |
| range compatibility | Acti 9 DT40 Vigi, Acti 9 C40, Acti 9 iDPN Vigi, Acti 9 C120, Acti 9 DT60, Acti 9 iDPN, Acti 9 C60H-DC, Acti 9 C60NA-DC, Acti 9 C60PV-DC, Acti 9 DPN Vigi, Acti 9 DT40, Acti 9 ID C40, Acti 9 IDc, Acti 9 ITG40, Acti 9 C120NA-DC, Acti 9 SW60-DC, Acti 9 C40 Vigi |
| connections - terminals | clamp terminal (bottom) 2 cable(s) 1.5-1.5 mm² - flexible, clamp terminal (bottom) 1 cable(s) 0.5-2.5 mm² - rigid, clamp terminal (bottom) 2 cable(s) 1.5-1.5 mm² - flexible with ferrule |
| height | 85.3 mm |
| mounting support | DIN rail |
| compatibility code | SD |
| width | 9 mm |
| depth | 73.5 mm |
| IP degree of protection | IP20 conforming to EN/IEC 60947-5-1 |
| [In] rated current | 1-1 A at 130 V DC, 1.5-1.5 A at 60 V DC, 2-2 A at 48 V DC, 6-6 A at 24 V DC, 3-3 A at 380...415 V AC - 50/60 Hz, 6-6 A at 220...240 V AC - 50/60 Hz |
| 9 mm pitches | 1 |
| colour | white |
| tightening torque | 1-1 N.m |
| market segment | small commercial, residential |
| signal contacts composition | 1 C/O |