Acti 9 C60H-DC, C60PV-DC miniature circuit breaker - C60H - 1 pole - 16 A - C curve - A9N61511
This Acti9 C60H-DC is a low voltage direct current miniature circuit breaker (MCB).
It has 1P, rated current 16A and C tripping curve.
The rated short circuit breaking capacity goes up to 10kA at 220VDC conforming to EN 60947-2 standard and 10kA at 220VDC conforming to EN 60947-2 standard.
This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2.
This miniature circuit breaker protects circuit against short circuit and overload current.
It offers VisiTrip for safety during maintenance and VisiSafe to reduce intervention time.
The Acti9 C60H-DC is used in direct current circuit (industrial control and automation, transport, renewable energy).
This device is dedicated to industrial control, automations, transport and renewable energy applications.
It has an electrical endurance going up to 3000 cycles and a mechanical endurance going up to 20000 cycles.
The Ue operational voltage is 250VDC.
The Ui rated insulation voltage is 500VDC.
The Uimp rated impulse withstand voltage is 6kV.
The operating frequency is 50Hz or 60Hz.
It is DIN rail mountable.
Its width is 2 pitches of 9mm.
Pollution degree is 3.
Overvoltage category is IV.
The product colour is white (RAL9003).
The weight is 0.128kg.
According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure.
The operating temperature is -25°C to 70°C.
The storage temperature is -40°C to 85°C.
| Attribute | Value |
|---|---|
| SKU | A9N61511 |
| ambient air temperature for storage | -40-85 °C |
| overvoltage category | IV |
| pollution degree | 3 conforming to EN 60947-2, 3 conforming to IEC 60947-2 |
| ambient air temperature for operation | -25-70 °C |
| number of protected poles | 1 |
| range of product | C60 |
| product or component type | Miniature Circuit Breaker |
| net weight | 0.128 kg |
| mounting mode | fixed |
| standards | IEC 60947-2, EN 60947-2 |
| tropicalisation | 2 conforming to IEC 60068-2 |
| earth-leakage protection | without |
| mechanical durability | 20000 cycles |
| comb busbar and distribution block compatibility | top or bottom: standard |
| device short name | C60H-DC |
| breaking capacity | 10 kA Icu at 220 V DC conforming to EN 60947-2, 10 kA Icu at 220 V DC conforming to IEC 60947-2, 6 kA Icu at 250 V DC conforming to EN 60947-2, 6 kA Icu at 250 V DC conforming to IEC 60947-2, 20 kA Icu at 110 V DC conforming to EN 60947-2, 20 kA Icu at 110 V DC conforming to IEC 60947-2 |
| trip unit technology | thermal-magnetic |
| range | Acti 9 |
| product compatibility | C60 accessories, C60 auxiliary |
| [Ics] rated service breaking capacity | 15 kA 75 % conforming to EN 60947-2 - 110 V DC, 15 kA 75 % conforming to IEC 60947-2 - 110 V DC, 4.5 kA 75 % conforming to EN 60947-2 - 250 V DC, 4.5 kA 75 % conforming to IEC 60947-2 - 250 V DC, 7.5 kA 75 % conforming to EN 60947-2 - 220 V DC, 7.5 kA 75 % conforming to IEC 60947-2 - 220 V DC |
| breaking capacity code | H |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to IEC 60947-2, 6 kV conforming to EN 60947-2 |
| product name | Acti 9 C60H-DC |
| provision for padlocking | padlockable |
| network frequency | 50/60 Hz |
| mounting support | 35 mm symmetrical DIN rail |
| compatibility code | C60H-DC |
| operating altitude | 2000 m |
| [In] rated current | 16 A at 25 °C |
| curve code | C |
| network type | DC |
| 9 mm pitches | 2 |
| poles description | 1P |
| colour | white |
| tightening torque | power circuit: 2.5-2.5 N.m top or bottom |
| electrical durability | 3000 cycles 250 V DC, 6000 cycles 250 V DC |
| device application | distribution |
| control type | toggle |
| [Ue] rated operational voltage | 250 V DC |
| local signalling | ON/OFF indication |
| market segment | small commercial, residential |
| utilisation category | category A conforming to EN 60947-2, category A conforming to IEC 60947-2 |
| [Ui] rated insulation voltage | 500 V DC conforming to IEC 60947-2, 500 V DC conforming to EN 60947-2 |
| suitability for isolation | yes conforming to IEC 60947-2, yes conforming to EN 60947-2 |
| contact position indicator | yes |
| locking options description | in position O |
