Acti 9 iCT 100A 2NO 220...240V 50Hz contactor - A9C20882
This Acti9 iCT is a modular contactor.
It is a 2P remote control device with 2 normally open contact.
The In rated current is 100A for AC-7a.
The Ue rated operational voltage is 250VAC.
The Uc control voltage is 220VAC to 240VAC.
This device could be used for control circuits.
This device could be used for HVAC system applications.
This product is compliant with EN/IEC 61095 standard.
Electrical endurance goes up to 30000 cycles for AC-7A.
The maximum switching operations is 100 per day.
The Ui rated insulation voltage is 500VAC.
The Uimp rated impulse withstand voltage is 4kV.
Pollution degree is 2.
It is DIN rail mountable.
Its width is 6 pitches of 9mm.
The product color is white (RAL9003).
The dimensions are (W) 85mm x (H) 54mm x (D) 60mm.
According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure.
The operating temperature is from -5°C to 60 °C.
The storage temperature is from -40°C to 70°C.
Attribute | Value |
---|---|
SKU | A9C20882 |
relative humidity | 95-95 % at 55-55 °C |
ambient air temperature for storage | -40-70 °C |
pollution degree | 2 |
ambient air temperature for operation | -5-60 °C |
range of product | iCT |
product or component type | Kontaktor |
mounting mode | clip-on |
standards | UTE C 61-481, IEC 61095, EN 61095 |
tropicalisation | 2 conforming to EN 60947-4-1 |
device short name | iCT |
range | Acti 9 |
product compatibility | iACTs, iACTp, iATEt, iACTc |
[Ie] rated operational current | 100 A AC-7A |
[Uc] control circuit voltage | 220...240 V AC 50 Hz |
[Uimp] rated impulse withstand voltage | 4 kV |
product name | Acti 9 iCT |
pole contact composition | 2 NO |
hold-in power consumption in VA | 6.5-6.5 VA |
inrush power in VA | 53 VA |
maximum power | AC-7A: 2.1 W at 250 V AC 50 Hz |
network frequency | 50 Hz |
connections - terminals | control circuit: tunnel type terminals2 cable(s) 1.5-1.5 mm² rigid, control circuit: tunnel type terminals1 cable(s) 1.5-2.5 mm² rigid, control circuit: tunnel type terminals2 cable(s) 1.5-2.5 mm² flexible, power circuit: tunnel type terminals1 cable(s) 6-35 mm² solid or flexible |
height | 85 mm |
mounting support | 35 mm symmetrical DIN rail |
compatibility code | iCT |
width | 54 mm |
depth | 60 mm |
operating altitude | 2000 m |
IP degree of protection | IP20 conforming to IEC 60529, IP40 (modular enclosure) conforming to IEC 60529 |
network type | AC |
9 mm pitches | 6 |
poles description | 2P |
colour | white |
tightening torque | power circuit: 3.5-3.5 N.m, control circuit: 0.8-0.8 N.m A1 / A2 |
electrical durability | 30000 cycles EN 61095 250 V 16 A AC 50 Hz AC-7A, 30000 cycles UTE C 61-481 250 V 6 A AC 50 Hz AC-7A, 30000 cycles IEC 61095 250 V AC 50 Hz AC-7A |
device application | heating-low inductive load |
control type | remote control |
[Ue] rated operational voltage | 250 V AC 50 Hz |
local signalling | action indicator |
market segment | small commercial, residential |
utilisation category | AC-1 conforming to EN 60947-4-1, AC-7A conforming to EN 61095, AC-7A conforming to IEC 61095, AC-7A conforming to UTE C 61-481, AC-1 conforming to IEC 60947-4-1 |
[Ui] rated insulation voltage | 500 V AC 50 Hz |
heat dissipation | 2.1-2.1 W at 50/60 Hz |
control signal type | maintained |
noise level | 30 dB |
switching frequency | 100 switching operations/day |