Acti 9 iPF K 20 modular surge arrester - 1 pole + N - 340V - A9L15692
This Acti9 iPF K 20 product is a modular surge arrester.
It protects 1P+N installations.
The Imax maximum discharge current is 20kA .The In nominal discharge current is 5kA.
The multi-pole single-piece surge arrester range is adapted for TT, TN-S, TN-C earthing systems.
This type 2 incoming protection surge arrester is recommended for a medium risk level.
The Uc maximum continuous operating voltage in common mode is 260VAC between neutral and earth, and is 340VAC between phase and earth.
The Up Voltage protection level is 1.5kV in common mode (between neutral and earth) and is 1.1kV in differential mode (between phase and neutral).
The Ue rated operational voltage is 230VAC +/- 10%.
The product colour is white (RAL9003).The dimensions are (W) 36mm x (H) 81mm x (D) 69mm.
The weight is 210g.
The degree of protection is IP20 and IP40 in modular enclosure.
The operating temperature is -25°C to 60°C.
The storage temperature is -40°C to 85°C.
This product is compliant with IEC 61643-11 and EN 61643-11 standards.
| Attribute | Value |
|---|---|
| SKU | A9L15692 |
| product certifications | EAC, CE |
| relative humidity | 5-95 % |
| ambient air temperature for storage | -40-85 °C |
| ambient air temperature for operation | -25-60 °C |
| range of product | iPF K |
| product or component type | Surge Arrester |
| net weight | 210 g |
| mounting mode | clip-on |
| standards | IEC 61643-11:2011 |
| device short name | iPF K |
| range | Acti 9 |
| wire stripping length | 11 mm |
| surge arrester class type | type 2 |
| maximum discharge current | common mode: 20 kA L/PE, common mode: 20 kA N/PE, differential mode: 20 kA L/N |
| IK degree of protection | IK03 conforming to IEC 62262 |
| product name | Acti 9 iPF K |
| surge arrester type | electrical distribution network |
| signalling circuit voltage | 0.25 A/250 V AC 50/60 Hz |
| residual current | 0.003 mA |
| connections - terminals | tunnel type terminal (top or bottom) 25-25 mm² rigid, tunnel type terminal (top or bottom) 16-16 mm² flexible, tunnel type terminal (top or bottom) 16-16 mm² flexible with ferrule |
| height | 81 mm |
| mounting support | DIN rail |
| compatibility code | iPF K 20 |
| width | 36 mm |
| depth | 69 mm |
| operating altitude | 2000 m |
| IP degree of protection | IP40 on front face: conforming to IEC 60529, IP20 on terminal: conforming to IEC 60529 |
| 9 mm pitches | 4 |
| poles description | 1P + N |
| colour | white (RAL 9003) |
| tightening torque | 3.5-3.5 N.m |
| device application | distribution |
| [Ue] rated operational voltage | 230 V AC (+/- 10 %) at 50/60 Hz |
| disconnector device type | associated circuit breaker iK60N 20 A curve C - Icu 6 kA, associated fuse gG 25 A - Icu 25 kA |
| surge arrester technology | MOV + GDT |
| [Ut] temporary overvoltage | 337 V L/N 5 s withstand, 442 V L/PE 5 s withstand, 1200 V N/PE 200 ms withstand, 1453 V L/PE 200 ms withstand |
| response time | <= 25 ns |
| maximum [Up] voltage protection level | common mode <1.5 kV type 2 N/PE, differential mode <1.1 kV type 2 L/N |
| nominal discharge current | common mode: 5 kA (L/PE), common mode: 5 kA (N/PE), differential mode: 5 kA (L/N) |
| earthing system | TT, TN-S |
| [Uc] maximum continuous operating voltage | common mode: 340 V L/PE, common mode: 260 V N/PE, differential mode: 340 V L/N |
| remote signalling | without |
| short-circuit withstand | 25 kA |