Acti 9 iRTA relay - delays energizing of a load-1C/O - Uc 24-240 VAC/24VDC - A9E16065
This Acti9 iRTA is an operating Time delay relay.
The time delay range is 0.1s to 100h.
It delays emergizing of a load.
The single time daily cycle starts at the switching ON of the iRTA relay power supply.
The Uc control and power supply voltage is from 24VAC to 240VAC +/- 10% and 24VDC +/- 10%.
The load is energized at the end of the time delay T.
The operating frequency is 50Hz or 60Hz.
The precision of the device is +/- 10% of the full scale.
The minimum duration of control impulse is 100ms.
The maximum resetting time per voltage interruption is 100ms.
The nominal switching current is 21A at 250VAC.
The mechanical endurance under AC1 category is over 5 x 10exp6 switchning operations.
The electrical endurance under AC1 category is over 10exp5 switchning operations.
The type of excitation is analog (ou analogue) with single function.
The device is flashing during time delay.
It includes a changeover contact.
The width in 9mm pitches is 2.
The degree of protection is IP20.
The dimensions are (W) 18mm x (H) 90mm x (D) 72mm.
The weight is 65g.
The operating temperature is -5°C to + 55°C.
The storage temperature is -40°C to + 70°C.
| Attribute | Value |
|---|---|
| SKU | A9E16065 |
| ambient air temperature for storage | -40-70 °C |
| ambient air temperature for operation | -5-55 °C |
| product or component type | Miniature Circuit Breaker |
| net weight | 0.065 kg |
| mounting mode | fixed |
| mechanical durability | 5000000 cycles |
| device short name | iRTA |
| range | Command Control |
| [Ie] rated operational current | 8 A at 250 V AC, 8 A at 250 V DC, 0.01 A at 5 V DC |
| [Uc] control circuit voltage | 24 V DC, 24...240 V AC 50/60 Hz |
| product name | iRT |
| [Us] rated supply voltage | 24...240 V AC at 50/60 Hz, 24 V DC |
| immunity to microbreaks | 20 ms |
| repeat accuracy | +/- 0.5 % |
| relay application | time delay relay |
| connections - terminals | tunnel type terminals for 2 cable(s) 1.5-1.5 mm² flexible with cable end, tunnel type terminals for 2 cable(s) 1.5-1.5 mm² flexible without cable end, tunnel type terminals for 2 cable(s) 2.5-2.5 mm² rigid with cable end, tunnel type terminals for 2 cable(s) 2.5-2.5 mm² rigid without cable end |
| height | 93 mm |
| mounting support | 35 mm symmetrical DIN rail |
| compatibility code | iRTA |
| width | 18 mm |
| depth | 72 mm |
| IP degree of protection | IP20 |
| 9 mm pitches | 2 |
| colour | white |
| electrical durability | AC-1: 100000 cycles |
| local signalling | LED, flashing for time delay, LED green for power ON |
| market segment | small commercial, residential |
| signal contacts composition | 1 C/O |
| time delay range | 0.1...360000 s |
| impulse duration | > 100 ms |
| undervoltage behaviour | 100 ms |
| time delay type | delays energizing of a load |
| accuracy error | +/- 10 % |
| type of setting | rotary knob: time delay configuration |