Acti 9 iSSW linear switch - 2 C/O - 20A - 250 V AC - 3 positions - A9E18074
This Acti 9 iSSW is a linear switch used for the manual control of electric circuits.
It is a 3 positions switch with 2 changeover contacts (2 C/O).
The phase-separated wall can be divided to allow all the types of com busbar to pass through.
It comes with staggered terminals to simplify connection.
The tightening torque of connection is 1N.m for PZ1 screwdriver type.
The Ue rated operational voltage is 250VAC.
The Ie rated operational current is 20A.
The operating frequency is 50Hz.
The connection allows rigid copper cables from 0.5mm² minimum to 2x2.5mm² maximum.
The connection allows flexible or with ferrule copper cables from 0.5mm2 minimum to 2x2.5mm² maximum.
The number of cycles open and close (O-C) is 30000.
The endurance is 30000 operations with AC22 current category under cos phi=0.8.
The width in 9mm pitches is 4.
The dimensions are (W) 36mm x (H) 82mm x (D) 75mm.
The pollution degree is 3.
The tropicalization is treatment 2 (relative humidity 95% at 55°C).
The operational temperature is from -20°C to +50°C.
The storage temperature is from -40°C to +70°C.
It complies with IEC 60669-1 and IEC 60947-5-1 standards.
| Attribute | Value |
|---|---|
| SKU | A9E18074 |
| relative humidity | 95-95 % at 55-55 °C |
| ambient air temperature for storage | -40-70 °C |
| pollution degree | 3 |
| ambient air temperature for operation | -20-50 °C |
| range of product | Acti 9 |
| product or component type | Miniature Circuit Breaker |
| mounting mode | clip-on |
| standards | IEC 60669-1, IEC 60947-5-1 |
| tropicalisation | 2 |
| device short name | iSSW |
| range | Command Control |
| wire stripping length | 9 mm |
| [Ie] rated operational current | 20 A |
| product name | Acti 9 iSSW |
| connections - terminals | staggered tunnel terminal (downside) 2 cable(s) 0.5-2.5 mm² flexible, staggered tunnel terminal (downside) 2 cable(s) 0.5-2.5 mm² rigid without cable end |
| height | 82 mm |
| mounting support | DIN rail |
| compatibility code | iSSW |
| marking | 1 - 0 - 2 |
| width | 36 mm |
| depth | 75 mm |
| IP degree of protection | IP20 conforming to IEC 60529 |
| 9 mm pitches | 4 |
| colour | white |
| tightening torque | 1-1 N.m |
| electrical durability | AC-22: 30000 cycles cos Phi = 0.8 |
| device application | electrical circuit control |
| control type | toggle 3 positions |
| [Ue] rated operational voltage | 250 V AC 50/60 Hz |
| market segment | small commercial, residential |
| contacts type and composition | 2 C/O |