Acti 9 PRD1 Master modular surge arrester - 1 pole + N - 350V - with remote transfer - 16361
This Acti9 PRD1 is a modular surge arrester protecting 1P+N electrical installations against direct lightning strikes.
The In nominal discharge current is 100kA.
The Type 1 surge arrester is recommended for electrical installations in the service sector and industrial buildings protected by a lightning conductor.
The surge arresters with "r" indication have remote transfer of the information "Cartridge to be replaced".
The Uc maximum continuous operating voltage in differential mode (between phase and neutral) is 350VAC.
The Uc maximum continuous operating voltage in common mode (between neutral and phase) is 350VAC.
The Up Voltage protection level in common mode (between neutral and earth) is 1.5kV.
The Up Voltage protection level in differential mode (between phase and neutral) is 1.5kV.
The Ue rated operational voltage is 230VAC +/- 10%.
The product colour is anthracite grey (RAL7016).The dimensions are (W) 71.6mm x (H) 90mm x (D) 70mm.
The weight is 732g.
The degree of protection is IP20 and IP40 in modular enclosure.
The operating temperature is -25°C to 60°C.
The storage temperature is -40°C to 80°C.
This product is compliant with EN 61643-11 and IEC 61643-11 standards.
| Attribute | Value |
|---|---|
| SKU | 16361 |
| product certifications | CE |
| relative humidity | 5-90 % |
| ambient air temperature for storage | -40-80 °C |
| ambient air temperature for operation | -25-60 °C |
| quality labels | KEMA-KEUR |
| range of product | PRD1 Master |
| product or component type | Surge Arrester |
| net weight | 0.732 kg |
| mounting mode | clip-on |
| standards | IEC 61643-11:2011, EN 61643-11:2012 |
| device short name | PRD1 Master |
| range | Acti 9 |
| surge arrester class type | type 1 |
| IK degree of protection | IK05 conforming to IEC 62262 |
| product name | Acti 9 PRD1 Master |
| surge arrester type | electrical distribution network |
| signalling circuit voltage | 1 A/250 V AC 50/60 Hz |
| connections - terminals | tunnel type terminal (downside) 2.5-35 mm², tunnel type terminal (upside) 2.5-35 mm² |
| height | 90 mm |
| mounting support | DIN rail |
| compatibility code | PRD1_Master |
| width | 71.6 mm |
| depth | 70 mm |
| operating altitude | 2000 m |
| IP degree of protection | IP40 on front face: conforming to IEC 60529, IP20 built-in: conforming to IEC 60529 |
| 9 mm pitches | 8 |
| poles description | 1P + N |
| colour | anthracite grey (RAL 7016) |
| tightening torque | 4.5-4.5 N.m |
| device application | distribution |
| [Ue] rated operational voltage | 230/400 V AC (+/- 10 %) at 50/60 Hz |
| disconnector device type | associated fuse gG 315 A standard, associated circuit breaker Compact NSX100F 100 A curve C - Icu 36 kA, associated circuit breaker Compact NSX100N 100 A curve C - Icu 50 kA |
| surge arrester technology | spark gap |
| response time | < 100 ns |
| maximum [Up] voltage protection level | common mode <1.5 kV type 2 N/PE, differential mode <1.5 kV type 2 L/N |
| nominal discharge current | common mode: 100 kA (N/PE), differential mode: 25 kA (L/N) |
| earthing system | TT, TN-S |
| [Uc] maximum continuous operating voltage | differential mode: 350 V L/N, common mode: 350 V N/PE |
| material | PBT (polybutylene terephthalate) |
| market segment | small commercial |
| signal contacts composition | 1 SD (1 C/O) |
| remote signalling | with |
| [If] follow current | 0.1 kA common mode N/PE, 50 kA differential mode L/N |
| [Iimp] impulse current | common mode: 100 kA N/PE 50 A.s, differential mode: 25 kA L/N 12.5 A.s |
| impulse current | 25 kA |