ClimaSys CV forced vent. IP54, 850m3/h, 230V, with outlet grille and filter G2 - NSYCVF850M230PF

Out of stock

SKU

NSYCVF850M230PF

Details

ClimaSys CV Axial motor ventilator.

230V 50Hz or 60Hz.

150W 50 Hz, 195W 60 Hz.

Free flow rate with standard filter of 803 m3/h at 50 Hz and 838 m3/h at 60 Hz.

336 x 316 x 162 mm.

Cut-out dimensions of 291 x 291 mm.

Outlet grille injected thermoplastic (ASA PC), Grey RAL 7035.

Connections terminals by cable.

2 protective grille on the front and rear surfaces.

Protection IP54.

More Information

More Information
Attribute	Value
SKU	NSYCVF850M230PF
ambient air temperature for storage	-40-70 °C
ambient air temperature for operation	-15-60 °C
bearing type	ball
input voltage	230 V 50/60 Hz
product or component type	Panel Industri & Kontrol Temperatur
net weight	4.1 kg
range	Sistem Ventilasi Panel
product name	ClimaSys CV
power range	150 W 50 Hz, 195 W 60 Hz
[Us] rated supply voltage	207...244 V
type of ventilation filter	standard
connections - terminals	terminal block
height	336 mm external:
width	316 mm external:
depth	162 mm external:
IP degree of protection	IP54
[In] rated current	0.65-0.65 A 50 Hz, 0.85-0.85 A 60 Hz
colour	outlet grille: grey (RAL 7035)
material	outlet grille: injected thermoplastic (ASA PC)
condition of use	outside temperature must be 5 °C lower than inside temperature, flow rates depends on the work point, see ProClima software, overfrequent filter replacement should be avoided, filter must be cleaned and replaced regularly, surrounding environment must be relatively clean
cut-out dimensions	291 x 291 mm
device composition	1 axial motor, 2 protective grille: on the front and rear surfaces, 1 filter: front of axial motor, 1 outlet grille: front, 1 cut-out template
noise level	75-76 dB
air flow	free flow rate with standard filter: 838 m3/h at 50 Hz, free flow rate with standard filter: 803 m3/h at 60 Hz
maximum pressure	170 Pa flow rate 0 m³/h

Technical Documents