Schneider Electric
EasyCan Capacitor - 15/18 kvar - 400 V - 50/60Hz - BLRCS150A180B40
Out of stock
SKU
BLRCS150A180B40
Details
EasyCan capacitor are designed to work in slightly polluted netwroks with Detuned reactors.
These capacitors are used for standard operating conditions, and when no significant non-linear loads are present.
These capacitor are the right choice to maximize the savings in an electrical system which is stable.
This capacitor provides a rated output power of 13.5 kVar at 380V AC, 50 Hz.
Fastening assured by a ClampTite terminal.
This component meet the standards IEC 60831-1 and IEC 60831-2.
The case product weight is 1.3 kg.
More Information
| Attribute | Value |
|---|---|
| SKU | BLRCS150A180B40 |
| relative humidity | 95-95 % |
| ambient air temperature for operation | -25-55 °C |
| rated voltage | 380-415 V AC 50/60 Hz |
| range of product | EasyCan |
| product or component type | Koreksi Faktor Daya |
| net weight | 1.3 kg |
| mounting mode | vertical |
| standards | IEC 60831-1, IEC 60831-2 |
| range | Kapasitor |
| dielectric material | metallized polypropylene film with Zn/Al alloy, |
| network frequency | 50/60 Hz |
| connections - terminals | ClampTite terminal |
| height | 308 mm |
| inrush current | 200 x In |
| operating altitude | 2000 m |
| IP degree of protection | IP20 |
| type of installation | indoor installation |
| series name | EasyCan |
| reactive power rating | 13.5 kvar 380 V 50 Hz, 16.2 kvar 380 V 60 Hz, 15 kvar 400 V 50 Hz, 18 kvar 400 V 60 Hz, 16.1 kvar 415 V 50 Hz, 19.4 kvar 415 V 60 Hz |
| diameter | 75 mm |
| capacitance tolerance | - 5 % to 10 % |
| maximum switching operation per year | 5000 |
| service life in hours | 100000 h |
| network harmonic content | <= 10 % |
| maximum permissible voltage | 1.1 x Un (8 hours over 24 hours) |
| impregnation material | biodegradable, non-PCB soft PUR resin |
| voltage test | 2.15 x Un AC between terminals for 10 s, <= 660 V - 3 kV AC between terminal and container for 10 s, >= 660 V - 6 kV AC between terminal and container for 10 s |
| dielectric losses | < 0.2 W/kvar |
| [Imp] maximum permanent current | 1.5 x In |
| temperature class | D |
| power losses | < 0.5 W/kVAr |
Technical Documents