Masterpact MTZ EIFE Ethernet module full kit - for MTZ2/MTZ3 drawout - spare part - LV851200SP
This EIFE is an embedded Ethernet interface module designed for MasterPact MTZ2/3 drawout circuit breakers.
It provides a single Ethernet access and gets all data delivered by Masterpact MTZ2/3 control unit.
It monitors the three positions of the circuit breaker when inserted in its chassis (IN, OUT, TEST).
The data flow is 10/100 Mbps for a simple daisy chain connection.
The connection to EIFE interface requires a ULP communication port installed on the chassis of MasterPact MTZ2/3.
The EIFE is mounted on MasterPact MTZ2/3 chassis DIN rail, and is connected to the ULP port by an ULP cable (supplied).
The EIFE power supply is provided by the ULP port through the ULP cable.
There are two RJ45 sockets for the connection to Ethernet network.
The EIFE is entirely part of the EcoStruxure Power architecture and Ethernet ready smart panels.
The EIFE firmware can be updated using EcoStruxure Power Commission software.
| Attribute | Value |
|---|---|
| SKU | LV851200SP |
| product certifications | EAC, CE, FCC |
| ambient air temperature for operation | -20-70 °C |
| localisation on device | chassis |
| product or component type | Air Circuit Breaker |
| net weight | 0.075 kg |
| mounting mode | drawout |
| standards | IEC 60947-6-2, IACS E10, IEC 60950 |
| range | MasterPact MTZ |
| range compatibility | Masterpact MTZ2 circuit breaker, Masterpact MTZ3 circuit breaker |
| communication network type | ULP, CANopen on USB, Ethernet, Ethernet TCP/IP10/100 Mbps on RJ45 |
| height | 51 mm |
| mounting support | DIN rail |
| width | 51 mm |
| depth | 52.5 mm |
| IP degree of protection | IP30 |
| device application | communication |
| device mounting | embedded |
| condition of use | with specific accessories |
| power consumption in W | 72 W |
| provided equipment | 1 instruction sheet |
| offer type | spare part |
| maximum supply current | 3 A |
| communication gateway | Ethernet TCP/IP to Modbus |
| web server | embedded |