Modicon M241 Controller 24 IO transistor PNP Ethernet - TM241CE24T
This product is part of the Modicon TM3 range, an offer of expansion I/O modules for Modicon M221, M241, M251 and M262.
The analogue output module provides 2 outputs with 11bit + sign and 12bit resolution.
It is an output module with a rated supply voltage of 24V DC and a current consumption of 70mA at 24V DC via external supply full load.
This product is capable of controlling variable speed drives or any device equipped with a current or voltage input.
There is an insulation between output and supply at 1500V AC, output and internal logic at 500V AC.
It is furnished with removable screw terminal for electrical connection with 5.08mm pitch adjustment for outputs.
It is an IP20 rated product.
Its dimensions are 23.6mm (Width) x 70mm (Depth) x 90mm (Height).
It weighs 0.115kg.
This product is certified by CE.
It meets EN/IEC 61131-2 and EN/IEC 61010-2-201 standards.
This module is compatible with Modicon M262, Modicon M241, Modicon M251 and Modicon M221 logic controller.
It supports top hat type TH35-15, top hat type TH35-7.5 rail conforming to IEC 60715 and plate or panel with fixing kit mount.
Modicon TM3 expansion modules have been designed with a simple interlocking assembly mechanism.
A bus expansion connector is used to distribute data and the power supply when assembling the Modicon TM3 modules with logic controllers.
Boost the performance of your controller with the Modicon TM3 I/O system specially designed for the Modicon M221, M241 and M251 logic controllers.
Attribute | Value |
---|---|
SKU | TM241CE24T |
product certifications | CSA, RCM, cULus, IACS E10 |
relative humidity | 10-95 %, without condensation (in operation), 10-95 %, without condensation (in storage) |
ambient air temperature for storage | -25-70 °C |
pollution degree | 2 |
ambient air temperature for operation | -10-50 °C (vertical installation), -10-55 °C (horizontal installation) |
resistance to electrostatic discharge | 8 kV in air conforming to EN/IEC 61000-4-2, 4 kV on contact conforming to EN/IEC 61000-4-2 |
voltage state 1 guaranteed | >= 15 V for input |
cycle time | 10 ms 16 Ethernet/IP, 64 ms 64 Modbus TCP |
discrete output voltage | 24 V DC for transistor output |
data backed up | 128 MB built-in flash memory for backup of user programs |
maximum number of I/O expansion module | 7 (local), 14 (remote) |
range of product | Modicon M241 |
product or component type | Relay & Power Supply |
net weight | 0.53 kg |
standards | UL 508, ANSI/ISA 12-12-01, CSA C22.2 No 142, CSA C22.2 No 213, EN/IEC 61131-2:2007, Marine specification (LR, ABS, DNV, GL), UL 1604 |
range | Modicon M241 |
[Us] rated supply voltage | 24 V DC |
electrical connection | removable screw terminal blockfor inputs and outputs (pitch 5.08 mm), removable screw terminal blockfor connecting the 24 V DC power supply (pitch 5.08 mm) |
immunity to microbreaks | 10 ms |
discrete output type | transistor |
maximum output frequency | 20 kHz for fast output (PWM mode), 100 kHz for fast output (PLS mode), 1 kHz for output |
backup time | 2 years at 25 °C |
voltage state 0 guaranteed | <= 5 V for input |
insulation | between supply and internal logic at 500 V AC, non-insulated between supply and ground, between output and internal logic at 500 V AC, between input and internal logic at 500 V AC, between fast input and internal logic at 500 V AC, non-insulated between inputs, between output groups at 500 V AC, non-insulated between outputs, between fast output and internal logic at 500 V AC |
discrete output current | 0.5 A for transistor output (Q0...Q9), 0.1 A for fast output (PTO mode) (Q0...Q3) |
memory capacity | 8 MB for program, 64 MB for system memory RAM |
maximum cable distance between devices | unshielded cable: <50 m for input, shielded cable: <10 m for fast input, unshielded cable: <50 m for output, shielded cable: <3 m for fast output |
port Ethernet | 10BASE-T/100BASE-TX - 1 port(s) copper cable |
height | 90 mm |
output voltage limits | 30 V DC |
mounting support | top hat type TH35-15 rail conforming to IEC 60715, top hat type TH35-7.5 rail conforming to IEC 60715, plate or panel with fixing kit |
marking | CE |
width | 150 mm |
depth | 95 mm |
inrush current | 50 A |
vibration resistance | 3.5 mm at 5-8.4 Hz on symmetrical rail, 3 gn at 8.4-150 Hz on symmetrical rail, 3.5 mm at 5-8.4 Hz on panel mounting, 3 gn at 8.4-150 Hz on panel mounting |
operating altitude | 0...2000 m |
IP degree of protection | IP20 with protective cover in place |
local signalling | 1 LED (green) for PWR, 1 LED (green) for RUN, 1 LED (red) for module error (ERR), 1 LED (red) for I/O error (I/O), 1 LED (green) for SD card access (SD), 1 LED (red) for BAT, 1 LED (green) for SL1, 1 LED (green) for SL2, 1 LED (red) for bus fault on TM4 (TM4), 1 LED per channel (green) for I/O state, 1 LED (green) for Ethernet port activity |
response time | 50 µs turn-on, I0...I13 terminal(s) for input, 50 µs turn-off, I0...I13 terminal(s) for input, <= 2 µs turn-on, I0...I7 terminal(s) for fast input, <= 2 µs turn-off, I0...I7 terminal(s) for fast input, <= 34 µs turn-on, Q0...Q9 terminal(s) for output, <= 250 µs turn-off, Q0...Q9 terminal(s) for output, <= 2 µs turn-on, Q0...Q3 terminal(s) for fast output, <= 2 µs turn-off, Q0...Q3 terminal(s) for fast output |
integrated connection type | non isolated serial link serial 1 with RJ45 connector and RS232/RS485 interface, non isolated serial link serial 2 with removable screw terminal block connector and RS485 interface, USB port with mini B USB 2.0 connector, Ethernet with RJ45 connector |
power consumption in W | 32.6-40.4 W (with max number of I/O expansion module) |
protection type | short-circuit protection, short-circuit and overload protection with automatic reset, reverse polarity protection for fast output |
shock resistance | 15 gn for 11 ms |
reset time | 10 ms automatic reset output, 12 s automatic reset fast output |
supply voltage limits | 20.4-28.8 V |
communication port protocol | non isolated serial link: Modbus master/slave |
communication service | FDR, DHCP server via TM4 Ethernet switch network module, DHCP client embedded Ethernet port, SMS notifications, updating firmware, SNMP client/server, programming, NGVL, monitoring, IEC VAR ACCESS, FTP client/server, downloading, SQL client, Modbus TCP client I/O scanner, Ethernet/IP originator I/O scanner embedded Ethernet port, Ethernet/IP target, Modbus TCP server and Modbus TCP slave, send and receive email from the controller based on TCP/UDP library, web server (WebVisu & XWeb system), OPC UA server, DNS client |
control signal type | A/B at 100 kHz for fast input (HSC mode), pulse/direction at 200 kHz for fast input (HSC mode), single phase at 200 kHz for fast input (HSC mode) |
surge withstand | 1 kV shielded cable common mode conforming to EN/IEC 61000-4-5, 1 kV relay output differential mode conforming to EN/IEC 61000-4-5, 1 kV input common mode conforming to EN/IEC 61000-4-5, 1 kV transistor output common mode conforming to EN/IEC 61000-4-5, 0.5 kV power lines (DC) differential mode conforming to EN/IEC 61000-4-5, 1 kV power lines (DC) common mode conforming to EN/IEC 61000-4-5 |
resistance to electromagnetic fields | 10 V/m 80 MHz...1 GHz conforming to EN/IEC 61000-4-3, 3 V/m 1.4 GHz...2 GHz conforming to EN/IEC 61000-4-3, 1 V/m 2 GHz...3 GHz conforming to EN/IEC 61000-4-3 |
resistance to fast transients | 2 kV (power lines) conforming to EN/IEC 61000-4-4, 1 kV (serial link) conforming to EN/IEC 61000-4-4, 1 kV (input) conforming to EN/IEC 61000-4-4, 1 kV (transistor output) conforming to EN/IEC 61000-4-4, 1 kV (Ethernet line) conforming to EN/IEC 61000-4-4 |
electromagnetic emission | conducted emissions - test level: 120...69 dBµV/m QP ( power lines) at 10-150 kHz conforming to EN/IEC 55011, conducted emissions - test level: 63 dBμV/m QP ( power lines) at 1.5-30 MHz conforming to EN/IEC 55011, conducted emissions - test level: 79...63 dBμV/m QP ( power lines) at 150-1500 kHz conforming to EN/IEC 55011, radiated emissions - test level: 40 dBμV/m QP class A at 30-230 MHz conforming to EN/IEC 55011, radiated emissions - test level: 47 dBμV/m QP class A at 230-1000 MHz conforming to EN/IEC 55011 |
discrete input voltage | 24 V |
discrete output number | 10 transistor 4 fast output |
discrete input number | 14 , discrete input 8 fast input conforming to IEC 61131-2 Type 1 |
transmission rate | 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15-15 m for RS485, 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3-3 m for RS232, 480 Mbit/s for bus length of 3-3 m for USB, 10/100 Mbit/s for Ethernet |
discrete input logic | sink or source |
accuracy | +/- 0.1 % at 0.02-0.1 kHz for fast output, +/- 1 % at 0.1-1 kHz for fast output |
input impedance | 4.7 kOhm for input, 2.81 kOhm for fast input |
clock drift | <= 60 s/month at 25-25 °C |
discrete input current | 5 mA for input, 10.7 mA for fast input |
maximum voltage drop | <1 V |
maximum leakage current | 5 µA for output |
supply | (serial 1)serial link supply: 5 V, <200 mA |
web services | web server |
resistance to conducted disturbances | 10 V 0.15...80 MHz conforming to EN/IEC 61000-4-6, 3 V 0.1...80 MHz conforming to Marine specification (LR, ABS, DNV, GL), 10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to Marine specification (LR, ABS, DNV, GL) |
discrete output logic | positive logic (source) |
storage altitude | 0-3000 m |
discrete input voltage type | DC |
positioning functions | PTO function 4 channel(s) (positioning frequency: 100 kHz), PTO function 4 channel(s) for transistor output (positioning frequency: 1 kHz) |
battery type | BR2032 lithium non-rechargeable, battery life: 4 year(s) |
discrete I/O number | 24 |
application structure | 4 cyclic master tasks, 3 cyclic master tasks + 1 freewheeling task, 8 external event tasks, 8 event tasks |
configurable filtering time | 1 µs for fast input, 0 ms for input, 12 ms for input, 12 ms for fast input, 1 ms for input, 4 ms for input |
execution time for 1 KInstruction | 0.3 ms for event and periodic task, 0.7 ms for other instruction |
realtime clock | with |
data storage equipment | <= 16 GB SD card (optional) |
counting input number | 4 fast input (HSC mode) at 200 kHz, 14 standard input at 1 kHz |
maximum current per output common | 2 A with Q0...Q3 for fast output, 2 A with Q4...Q7 for output, 1 A with Q8...Q9 for output |
maximum tungsten load | <2.4 W |
maximum number of connections | 8 Modbus server, 8 SoMachine protocol, 10 web server, 4 FTP server, 16 Ethernet/IP target, 8 Modbus client |
number of slave | 64 Modbus TCP:, 16 Ethernet/IP: |