OsiSense XC Special limit switch XCKMR - stay put crossed rods lever 6mm - 2x(2 NC) - slow - M20 - XCKMR54D1H29
This product is part of the XC Special range, an offer of limit switches.
This limit switch is a device that converts a mechanical motion into an electrical control signal.
It has 2 x (2 normally closed), slow-break, staggered contacts with positive opening operation and provides switch actuation by any moving part.
It has a metal square stay put crossed rods lever and supports lateral approach in 2 directions.
The movement of operating head is rotary.
It is furnished with screw clamp terminals for electrical connection, 5 electrical positions, 1 per direction and 3 entries tapped for M20 x 1.5 cable gland.
It is an IP66 and IK07 rated product.
It is a switch with a rated operational current of 3A at 240V AC, 0.55A at 125V AC and a conventional enclosed thermal current of 10A.
It offers long mechanical life with a mechanical durability of about 2 million operating cycles.
The limit switch head and body is made of Zamak.
Its dimensions are 200mm (Width) x 59mm (Depth) x 118mm (Height) and weighs 0.55kg.
It is suitable for hoisting and mechanical handling applications.
This product is certified by CE, CCC, UL and CSA.
It meets CSA C22.2 No 14, UL 508 and EN/IEC 60947-5-1 standards.
The XCKMR is a complete unit with 3 cable entries and positive opening contacts, one per position.
Very rugged with heavy duty metal cases.
Dedicated products for overhead cranes and block hoists for end of travel control.
Special format limit switches for severe environments.
| Attribute | Value |
|---|---|
| SKU | XCKMR54D1H29 |
| product certifications | CCC, CSA, UL, CE |
| ambient air temperature for storage | -40-85 °C |
| ambient air temperature for operation | -25-70 °C |
| electrical shock protection class | class I conforming to IEC 60536 |
| terminals description ISO n°1 | (11-12)NC, (21-22)NC |
| body type | fixed |
| range of product | OsiSense XC |
| product or component type | Detektor / Sensor |
| net weight | 0.55 kg |
| standards | CSA C22.2 No 14, UL 508, EN/IEC 60947-5-1 |
| mechanical durability | 2000000 cycles |
| device short name | XCKMR |
| range | Limit Switch |
| IK degree of protection | IK07 conforming to EN 50102 |
| short-circuit protection | 10 A cartridge fuse, type gG |
| contact operation | slow-break, staggered |
| positive opening | with |
| type of approach | lateral approach, 2 directions |
| minimum actuation speed | 6 m/min |
| contacts insulation form | Zb |
| electrical connection | screw-clamp terminals, clamping capacity: 1 x 0.5...2 x 2.5 mm² |
| contact code designation | A300, AC-15 (Ue = 240 V), Ie = 3 A, Ithe = 10 A conforming to EN/IEC 60947-5-1 appendix A, Q150, DC-13 (Ue = 125 V), Ie = 0.55 A conforming to EN/IEC 60947-5-1 appendix A |
| head material | zamak |
| height | 118-118 mm |
| compatibility code | XCKMR |
| width | 200 mm |
| depth | 59 mm |
| vibration resistance | 25 gn (f= 10-500 Hz) conforming to EN/IEC 60068-2-6 |
| IP degree of protection | IP66 conforming to EN/IEC 60529 |
| material | metal |
| fixing mode | by the body |
| cable entry | 3 entries tapped for M20 x 1.5 cable gland, cable outer diameter: 7-13 mm |
| [Ui] rated insulation voltage | 300 V conforming to UL 508, 300 V conforming to CSA C22.2 No 14, 500 V (pollution degree 3) conforming to EN/IEC 60947-1 |
| protective treatment | TC |
| contacts type and composition | 2 x (2 NC) |
| type of operator | stay put crossed rods lever metal square rod 6 mm, L = 200 mm |
| shock resistance | 50 gn conforming to EN/IEC 60068-2-27 |
| series name | special format |
| head type | rotary head |
| switch actuation | by any moving part |
| movement of operating head | rotary |
| product specific application | for hoisting and mechanical handling applications |
| maximum actuation speed | 1.5 m/s actuation point on the rod between 65 and 95 mm |
| number of poles | 4 |
| maximum resistance across terminals | 25 MOhm conforming to IEC 60255-7 category 3 |
| specific application | classic |
| body material | zamak |
| number of steps | 5 electrical positions |
| minimum torque for tripping | 0.5 N.m |
| positive opening minimum torque | 0.75 N.m |
| maximum displacement angle | -180 °, 180 ° |
| contact block per direction [control circuit] | 1 per direction |