OsiSense XC Special limit switch XCR - metal stay put crossed rods lever square rod 6mm - 2X(1NC+NO) - XCRE18
This product is part of the XC Special range, an offer of limit switches.
The limit switch is a device that converts a mechanical motion into an electrical control signal.
It has four pole, 2 (1 normally closed + 1 normally opened), snap action contacts with positive opening operation.
It is a safety switch with a rated operational current of 3A at 240V, 0.27A at 250V.
It is furnished with screw clamp terminals for electrical connection.
It is an IP54 rated product.
It offers long mechanical and electrical life, the mechanical durability of about 10 million operating cycles and electrical durability of about 5 million operating cycles.
This rotary head limit switch has a fixed type body which is made of zinc alloy.
Its dimensions are 85mm (width) x 75mm (depth) x 95mm (height) and weighs 1.135kg.
It is suitable for hoisting handling, mining minerals metals and all others strong environmental constraints (foundry, welding automotive industries) applications etc.
This product is certified by CSA and CCC.
It complies with NF C 79-130, IEC 60947-5-1, IEC 60204-1, EN 60947-5-1, EN 60204-1 and CSA C22.2 No 14 standards.
Complete unit with 3 cable entries and positive opening contacts, one per position.
This special limit switch is dedicated to severe environments and heavy duty service.
| Attribute | Value |
|---|---|
| SKU | XCRE18 |
| product certifications | CCC, CSA |
| ambient air temperature for storage | -40-70 °C |
| overvoltage category | class I conforming to IEC 61140, class I conforming to NF C 20-030 |
| ambient air temperature for operation | -25-70 °C |
| terminals description ISO n°1 | (13-14)NO, (21-22)NC |
| body type | fixed |
| sensor design | - |
| range of product | OsiSense XC |
| product or component type | Detektor / Sensor |
| net weight | 1.135 kg |
| standards | CSA C22.2 No 14, EN 60947-5-1, IEC 60947-5-1, EN 60204-1, IEC 60204-1, NF C 79-130 |
| mechanical durability | 10000000 cycles |
| device short name | XCR |
| range | Limit Switch |
| short-circuit protection | 10 A cartridge fuse, type gG |
| contact operation | snap action |
| positive opening | with |
| type of approach | lateral approach, 2 directions |
| minimum actuation speed | 0.01 m/min |
| contacts insulation form | Zb |
| electrical connection | screw-clamp terminals, clamping capacity: 1 x 0.34...2 x 1.5 mm² |
| contact code designation | A300, AC-15 (Ue = 240 V), Ie = 3 A conforming to EN/IEC 60947-5-1 appendix A, Q300, DC-13 (Ue = 250 V), Ie = 0.27 A conforming to EN/IEC 60947-5-1 appendix A |
| height | 95-95 mm |
| compatibility code | XCR |
| width | 85 mm |
| depth | 75 mm |
| vibration resistance | 9 gn (f= 10-500 Hz) conforming to IEC 60068-2-6 |
| IP degree of protection | IP54 conforming to IEC 60529 |
| electrical durability | 5000000 cycles, DC-13, inductive load type, 120 V, 4 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C, 5000000 cycles, DC-13, inductive load type, 24 V, 7 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C, 5000000 cycles, DC-13, inductive load type, 48 V, 10 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C |
| material | metal |
| fixing mode | by the body |
| cable entry | 1 entry tapped for Pg 13.5 cable gland, cable outer diameter: 9-12 mm conforming to NF C 68-300 |
| [Ui] rated insulation voltage | 300 V conforming to UL 508, 500 V (pollution degree 3) conforming to IEC 60947-1, 300 V conforming to CSA C22.2 No 14, 500 V (pollution degree 3) conforming to VDE 0110 |
| protective treatment | TC |
| contacts type and composition | 2 x (1 NC + 1 NO) |
| type of operator | stay put crossed rods lever metal square rod 6 mm |
| shock resistance | 68 gn conforming to IEC 60068-2-27 |
| series name | special format |
| head type | rotary head |
| switch actuation | by any moving part |
| movement of operating head | rotary |
| product specific application | for hoisting and mechanical handling applications |
| maximum actuation speed | 1.5 m/s |
| number of poles | 4 |
| maximum resistance across terminals | 25 MOhm conforming to IEC 60255-7 category 3 |
| body material | zinc alloy |
| number of steps | 1 |
| minimum torque for tripping | 0.6 N.m |
| positive opening minimum torque | 0.7 N.m |
| maximum displacement angle | -90 °, 90 ° |
| contact block per direction [control circuit] | 2 per direction |