Schneider Electric
OsiSense XC Special limit switch XCRT - metal enclosure zinc plated steel roller with lever - 2C/O - XCRT115
Out of stock
SKU
XCRT115
Details
This industrial blue metal roller lever limit switch is part of XC special range, an offer of limit switches for conveyor belt shift monitoring applications.
It features a head with zinc plated steel lever for rotary movement operators, spring return to off position.
And a contact block with 2 single-pole CO snap action.
It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP65.
More Information
| Attribute | Value |
|---|---|
| SKU | XCRT115 |
| ambient air temperature for storage | -40-70 °C |
| overvoltage category | class I conforming to IEC 61140, class I conforming to NF C 20-030 |
| ambient air temperature for operation | -25-70 °C |
| terminals description ISO n°1 | (13-14)NO, (11-12)NC |
| body type | fixed |
| sensor design | - |
| range of product | OsiSense XC |
| product or component type | Detektor / Sensor |
| net weight | 1.17 kg |
| standards | CSA C22.2 No 14, EN 60947-5-1, IEC 60947-5-1, EN 60204-1, IEC 60204-1, NF C 79-130 |
| mechanical durability | 300000 cycles |
| device short name | XCRT |
| range | Limit Switch |
| short-circuit protection | 10 A cartridge fuse, type gG |
| contact operation | snap action |
| positive opening | without |
| type of approach | lateral approach, 2 directions |
| minimum actuation speed | 0.01 m/min |
| contacts insulation form | Za |
| electrical connection | screw-clamp terminals, clamping capacity: 1 x 0.5...2 x 2.5 mm² |
| contact code designation | A300, AC-15 (Ue = 240 V), Ie = 3 A conforming to EN/IEC 60947-5-1 appendix A, Q300, DC-13 (Ue = 250 V), Ie = 0.27 A conforming to EN/IEC 60947-5-1 appendix A |
| tripping angle | 10 ° for fault signalling, 18 ° for stopping of the conveyor belt |
| height | 95-95 mm |
| compatibility code | XCRT |
| width | 85 mm |
| depth | 75 mm |
| vibration resistance | 9 gn (f= 10-500 Hz) conforming to IEC 60068-2-6 |
| IP degree of protection | IP65 conforming to IEC 60529 |
| electrical durability | 5000000 cycles, DC-13, inductive load type, 120 V, 4 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C, 5000000 cycles, DC-13, inductive load type, 24 V, 7 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C, 5000000 cycles, DC-13, inductive load type, 48 V, 10 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C |
| material | metal |
| fixing mode | by the body |
| cable entry | 1 entry tapped for Pg 13.5 cable gland, cable outer diameter: 9-12 mm conforming to NF C 68-300 |
| [Ui] rated insulation voltage | 300 V conforming to UL 508, 500 V (pollution degree 3) conforming to IEC 60947-1, 300 V conforming to CSA C22.2 No 14, 500 V (pollution degree 3) conforming to VDE 0110 |
| protective treatment | TC |
| contacts type and composition | 2 C/O |
| type of operator | spring return roller zinc plated steel with lever |
| shock resistance | 30 gn for 18 ms conforming to IEC 60068-2-27 |
| series name | special format |
| head type | rotary head |
| switch actuation | by conveyor belt |
| movement of operating head | rotary |
| product specific application | for conveyor belt shift monitoring |
| number of poles | 2 |
| maximum resistance across terminals | 25 MOhm conforming to IEC 60255-7 category 3 |
| body material | zinc alloy |
| number of steps | 2 |
| minimum torque for tripping | 1 N.m |
| maximum displacement angle | -90 °, 90 ° |
| contact block per direction [control circuit] | 2 per direction |
Technical Documents