OsiSense XC Standard limit switch XCMD - M12 steel roller plunger - 1NC+1NO - snap - 1 m - XCMD21F2L1
This XCMD miniature format limit switch has a steel roller plunger and a Zamak body.
It has 1 x NO + 1 x NC snap action contacts and is pre-cabled with 1m cable.
This limit switch has a robust Zamak miniature and modular body, is pre-cabled, allowing an easier installation.
It is IP66 and IK06 impact resistant, making it ideal for heavy duty use in harsh conditions.
It is fixed on the machine by its body, and has a typical 5 million cycles electrical durability in DC-13 utilization category.
It complies with CCC, EN/IEC 60947.-5-1, CSA C22.2 No.14, EN/IEC 60204-1, UL 508.
Compatible with the well distributed range of common XCK heads, allowing quick replacement in case of damage.
Variable composition design allows late modifications on the switch, for example change of connection type or head.
| Attribute | Value |
|---|---|
| SKU | XCMD21F2L1 |
| product certifications | CCC, CSA, UL |
| ambient air temperature for storage | -40-70 °C |
| overvoltage category | class I conforming to IEC 61140, class I conforming to NF C 20-030 |
| ambient air temperature for operation | -25-70 °C |
| Cable length | 1 m |
| body type | fixed |
| sensor design | miniature |
| range of product | Telemecanique Limit switches XC Standard |
| product or component type | Detektor / Sensor |
| net weight | 0.205 kg |
| standards | CSA C22.2 No 14, UL 508, EN/IEC 60947-5-1, EN/IEC 60204-1 |
| mechanical durability | 10000000 cycles |
| device short name | XCMD |
| range | Limit Switch |
| IK degree of protection | IK06 conforming to EN 62262 |
| short-circuit protection | 6 A cartridge fuse, type gG |
| contact operation | snap action |
| positive opening | with |
| type of approach | lateral approach, 2 directions |
| contacts insulation form | Zb |
| electrical connection | removable cable connector |
| contact code designation | B300, AC-15 (Ue = 240 V), Ie = 1.5 A conforming to EN/IEC 60947-5-1 appendix A, R300, DC-13 (Ue = 250 V), Ie = 0.1 A conforming to EN/IEC 60947-5-1 appendix A |
| head material | zamak |
| height | 50-50 mm |
| compatibility code | XCMD |
| width | 30 mm |
| depth | 16 mm |
| vibration resistance | 5 gn (f= 10-500 Hz) conforming to IEC 60068-2-6 |
| IP degree of protection | IP67 conforming to IEC 60529, IP66 conforming to IEC 60529, IP68 conforming to IEC 60529 |
| electrical durability | 5000000 cycles, DC-13, 120 V, 1 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C, 5000000 cycles, DC-13, 24 V, 3 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C, 5000000 cycles, DC-13, 48 V, 2 W, operating rate <60 cyc/mn, load factor: 0.5 conforming to IEC 60947-5-1 appendix C |
| material | metal |
| fixing mode | by the head |
| device presentation | complete product |
| [Ui] rated insulation voltage | 300 V (pollution degree 3) conforming to UL 508, 400 V (pollution degree 3) conforming to IEC 60947-5-1, 300 V (pollution degree 3) conforming to CSA C22.2 No 14 |
| protective treatment | TC |
| contacts type and composition | 1 NC + 1 NO |
| type of operator | spring return roller plunger metal |
| shock resistance | 25 gn for 18 ms conforming to IEC 60068-2-27 |
| series name | standard format |
| head type | M12 plunger head |
| switch actuation | by 30° cam |
| movement of operating head | linear |
| maximum actuation speed | 10 cm/s |
| number of poles | 2 |
| maximum resistance across terminals | 25 MOhm conforming to IEC 60255-7 category 3 |
| specific application | miniature variable |
| positive opening minimum force | 35 N |
| body material | zamak |
| minimum force for tripping | 7 N |
| wire insulation material | PvR |
| cable composition | 5 x 0.75 mm² |