OsiSense XM pressure sensor XMLA - 0..6 bar - G 1/4A (male) - 24 V - 4..20 mA - XMLG006D21
This XMLG electronic pressure sensor has a a pressure rating of 6 bar, a M12 connector electrical connection and a G 1/4 a DIN 3852-e male fluid connection.
This pressure transmitter sensor is designed for accurate pressure control of fresh water (0°C-125°C), refrigeration fluids, hydraulic oils and corrosive fluids between -15°C and 125°C.
It is fixed directly on tubage.
It has a ceramic Al2O3 (Aluminium Oxide) cell and a stainless steel (AISI 303) body, this makes it compatible with corrosive non alkaline fluids.
10 million cycles mechanical durability for minimum required maintenance on your pressurized fluid circuits.
It complies with EN/IEC 61326-2-3, CSA C22.2 No.14, UL 508, EAC.
Well suited for a wide range of fluid types and applications from hydraulic and pneumatic installations to water pumps and machine tooling.
| Attribute | Value |
|---|---|
| SKU | XMLG006D21 |
| pressure sensor size | 6 bar |
| product certifications | EAC, CSA C22.2 No 14, UL 508 |
| ambient air temperature for storage | -40-85 °C |
| ambient air temperature for operation | -15-85 °C |
| resistance to electrostatic discharge | 15 kV in air conforming to EN/IEC 61000-4-2, 8 kV on contact conforming to EN/IEC 61000-4-2 |
| range of product | OsiSense XM |
| operating position | any position |
| product or component type | Detektor / Sensor |
| current consumption | < 20 mA |
| net weight | 0.095 kg |
| standards | CE, EN/IEC 61326-2-3 |
| mechanical durability | 10000000 cycles |
| range | Pressure Switch |
| [Uimp] rated impulse withstand voltage | 0.5 kV |
| [Us] rated supply voltage | 12 V DC (voltage limits: 8-33 V), 24 V DC (voltage limits: 8-33 V) |
| electrical connection | 1 male connector M12, 3 pins |
| repeat accuracy | +/- 0.1 % of the measuring range |
| scale type | fixed differential |
| pressure sensor name | XMLG |
| response time on output | < 2 ms |
| height | 58.1 mm |
| vibration resistance | 20 gn (f= 9-2000 Hz) conforming to EN/IEC 60028-2-6 |
| IP degree of protection | IP66 conforming to EN/IEC 60529, IP67 conforming to EN/IEC 60529 |
| Quantity per set | set of 1 |
| type of packing | individual |
| protection type | reverse polarity, load short-circuit |
| protective treatment | TC |
| shock resistance | 25 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| NEMA degree of protection | NEMA 4 |
| measurement accuracy | +/- 0.3 % of the measuring range |
| length | 48.5 mm |
| surge withstand | 1 kV 42 Ohm conforming to EN/IEC 61000-4-5, 500 kV 12 Ohm conforming to EN/IEC 61000-4-5 |
| resistance to electromagnetic fields | 200 V/m 80-1000 Hz conforming to EN/IEC 61000-4-3 |
| resistance to fast transients | 4 kV conforming to EN/IEC 61000-4-4 |
| diameter | 22.8 mm |
| local display | without |
| pressure sensor type | pressure transmitter |
| controlled fluid | air (-15-125 °C), corrosive fluid (-15-125 °C), hydraulic oil (-15-125 °C), fresh water (0-125 °C), air,hydraulic oil,corrosive fluid,fresh water |
| electrical circuit type | control circuit |
| maximum permissible accidental pressure | 13.5 bar |
| materials in contact with fluid | stainless steel type AISI 303, ceramic, FPM (Viton) |
| temperature of controlled fluid | -15-125 °C |
| destruction pressure | 15 bar |
| fluid connection type | G 1/4A (male) conforming to DIN 3852-E |
| type of output signal | analogue |
| resistance to conducted disturbances | 30 V (0.15-80 Hz) conforming to EN/IEC 61000-4-6 |
| resistance to magnetic fields | 30 A/m 50 Hz conforming to EN/IEC 61000-4-8 |
| analogue output function | 4...20 mA, 2 wires |
| drift of the zero point | +/- 0.015 % of measuring range/°C |
| drift of the sensitivity | +/- 0.015 % of measuring range/°C |
| pressure setting range | 0-6 bar |
