Schneider Electric
OsiSense XM pressure switch FSG 4.6 bar - adjustable scale 2 thresholds - 2NC - FSG2
Out of stock
SKU
FSG2
More Information
Attribute | Value |
---|---|
SKU | FSG2 |
pressure sensor size | 4.6 bar |
ambient air temperature for storage | -30-80 °C |
ambient air temperature for operation | 0-45 °C |
electrical shock protection class | class I conforming to IEC 536 |
terminals description ISO n°1 | (1-2)NC, (3-4)NC |
pressure switch type of operation | regulation between 2 thresholds |
adjustable range of switching point on rising pressure | 1.4-4.6 bar |
maximum permissible pressure - per cycle | 5.75 bar |
range of product | OsiSense XM |
operating position | any position |
product or component type | Detektor / Sensor |
net weight | 0.34 kg |
standards | CE, EN/IEC 60730 |
mechanical durability | 1000000 cycles |
range | Pressure Switch |
short-circuit protection | 20 A cartridge fuse, type gG |
electrical connection | screw-clamp terminals, clamping capacity: 1 x 1...2 x 2 mm² |
repeat accuracy | 2 % |
scale type | adjustable differential |
possible differential minimum at high setting | 1.2 bar |
possible differential maximum at high setting | 2.3 bar |
pressure sensor name | FSG |
height | 96 mm |
width | 72 mm |
depth | 102 mm |
IP degree of protection | IP20 conforming to EN/IEC 60529 |
[In] rated current | 10 A at 250 V AC conforming to EN 60730-1 |
electrical durability | 100000 cycles, operating rate <10 cyc/mn |
cable entry | 2 cable entries with grommet |
[Ui] rated insulation voltage | 500 V conforming to EN/IEC 60947-1 |
maximum operating rate | 10 cyc/mn |
protective treatment | TC |
motor power kW | 0.75 kW/1 hp at 110 V AC, 1 phase, 1.1 kW/1.5 hp at 110 V AC, 3 phases, 1.5 kW/2 hp at 230 V AC, 1 phase, 1.5 kW/2 hp at 400 V AC, 1 phase, 2.2 kW/3 hp at 230 V AC, 3 phases, 2.2 kW/3 hp at 400 V AC, 3 phases |
contacts type and composition | 2 NC snap action |
enclosure material | PS |
product specific application | - |
local display | without |
pressure sensor type | electromechanical pressure sensor |
pressure actuator | diaphragm |
terminal block type | 4 terminals |
controlled fluid | fresh water (0-70 °C), sea water (0-70 °C) |
setting | internal |
electrical circuit type | power circuit |
adjustable range of switching point on falling pressure | 0.3-3.4 bar |
maximum permissible accidental pressure | 8 bar |
materials in contact with fluid | nitrile, nylon 6/6, zinc plated steel |
destruction pressure | 20 bar |
fluid connection type | G 1/4 (female) conforming to ISO 228 |
possible differential minimum at low setting | 1 bar |
possible differential maximum at middle setting | 2.2 bar |
possible differential minimum at middle setting | 1.1 bar |
possible differential maximum at low setting | 2.1 bar |
Technical Documents