Schneider Electric
OsiSense XM pressure switch XMLA 2.5 bar - fixed scale 1 threshold - 1 C/O - XMLA002A2S11
Out of stock
SKU
XMLA002A2S11
Details
This XMLA electromechanical pressure switch has a fixed differential for detection of a single threshold and a zinc alloy body with a range scale window.
This pressure switch is designed for detection of a single pressure threshold in air, fresh water, hydraulic oils, corrosive fluids and viscous products up to 70°C.
It is fixed directly on tubage.
It provides zinc alloy enclosure for robust performance.
8 million cycles mechanical durability for minimum required maintenance on your pressurized fluid circuits.
It complies with CCC, EN/IEC 60947-5-1, CSA C22.2 No.14, LROS, UL 508, EAC, BV.
More Information
| Attribute | Value |
|---|---|
| SKU | XMLA002A2S11 |
| pressure sensor size | 2.5 bar |
| product certifications | EAC, CCC, LROS (Lloyds register of shipping), BV, CSA, UL |
| ambient air temperature for storage | -40-70 °C |
| ambient air temperature for operation | -25-70 °C |
| electrical shock protection class | class I conforming to NF C 20-030, class I conforming to IEC 1140, class I conforming to IEC 536 |
| terminals description ISO n°1 | (13-14-11-12)OF |
| pressure switch type of operation | detection of 1 single threshold |
| adjustable range of switching point on rising pressure | 0.15-2.5 bar |
| maximum permissible pressure - per cycle | 5 bar |
| range of product | OsiSense XM |
| operating position | any position |
| product or component type | Detektor / Sensor |
| net weight | 0.995 kg |
| standards | CE, CSA C22.2 No 14, UL 508, EN/IEC 60947-5-1 |
| mechanical durability | 8000000 cycles |
| device short name | XMLA |
| range | Pressure Switch |
| contacts material | silver contacts |
| short-circuit protection | 10 A cartridge fuse, type gG (gl) |
| electrical connection | screw-clamps terminals, 1 x 0.5...2 x 2.5 mm², 1 connector Pg 13 |
| repeat accuracy | 2 % |
| scale type | fixed differential |
| height | 158 mm |
| width | 35 mm |
| depth | 77.5 mm |
| vibration resistance | 4 gn conforming to IEC 60068-2-6 (f = 30-500 Hz) |
| IP degree of protection | IP66 conforming to EN/IEC 60529 |
| [In] rated current | 3 A, B300, AC-15 (Ue = 120 V) conforming to EN/IEC 60947-5-1, 1.5 A, B300, AC-15 (Ue = 240 V) conforming to EN/IEC 60947-5-1, 0.1 A, R300, DC-13 (Ue = 250 V) conforming to EN/IEC 60947-5-1 |
| cable entry | cable gland 9-13 mm |
| [Ui] rated insulation voltage | 300 V conforming to UL 508, 300 V conforming to CSA C22.2 No 14, 500 V conforming to EN/IEC 60947-1 |
| maximum operating rate | 120 cyc/mn |
| protective treatment | TC standard version |
| contacts type and composition | 1 C/O |
| shock resistance | 50 gn conforming to IEC 60068-2-27 |
| AWG gauge | AWG 20...AWG 14 |
| enclosure material | zinc alloy |
| product specific application | - |
| maximum resistance across terminals | 25 mOhm conforming to IEC 255-7 category 3, 25 mOhm conforming to NF C 93-050 method A |
| local display | with |
| pressure sensor type | electromechanical pressure sensor |
| pressure actuator | diaphragm |
| terminal block type | 4 terminals |
| controlled fluid | air (0-70 °C), fresh water (0-70 °C), hydraulic oil (0-70 °C), air,hydraulic oil,fresh water |
| natural differential at high setting | 0.13 bar (+/- 0.03 bar) |
| setting | external |
| electrical circuit type | control circuit |
| auxiliary contacts operation | snap action |
| adjustable range of switching point on falling pressure | 0.02-2.37 bar |
| maximum permissible accidental pressure | 9 bar |
| materials in contact with fluid | zinc alloy, nitrile |
| temperature of controlled fluid | 0-70 °C |
| destruction pressure | 18 bar |
| natural differential at low setting | 0.13 bar (+/- 0.03 bar) |
| fluid connection type | G 1/4 (female) conforming to ISO 228 |
Technical Documents