Osisense XS & XT inductive sensor XS6 M30 - L74mm - brass - Sn15mm - 12..48VDC - M12 - XS630B1PBM12
This XS cylindrical (M30 thread) inductive proximity sensor has a PPS sensing face and a nickel plated brass case.
It has a supply voltage of 12V to 48V DC.
This general purpose threaded cylindrical inductive proximity sensor is flush mountable and has an increased sensing range.
It is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts.
Corrosion-resistant and non-magnetic nickel plated brass provides magnetic shielding to the sensor, better accuracy and immunity to magnetic disturbance.
It has 4 LED viewports for easy sensor status viewing, setup and troubleshooting.
IP65, IP67 and IP69K protection makes this product ready for the harshest environments.
It can operate in very cold (-25°C) and hot environments (+70°C).
It has a standard M12 connector, compatible with all existing market sensor cabling.
It is CSA, UL certified.
| Attribute | Value |
|---|---|
| SKU | XS630B1PBM12 |
| product certifications | CSA, UL, E2 |
| ambient air temperature for storage | -40-85 °C |
| ambient air temperature for operation | -25-70 °C |
| body type | fixed |
| maximum delay response | 0.6 ms |
| maximum delay recovery | 1.4 ms |
| sensor type | inductive proximity sensor |
| sensor design | cylindrical M30 |
| wiring technique | 3-wire |
| range of product | Telemecanique Inductive proximity sensors XS |
| product or component type | Detektor / Sensor |
| current consumption | <= 10 mA no-load |
| net weight | 0.15 kg |
| range | Proximity |
| [Us] rated supply voltage | 12...48 V DC with reverse polarity protection |
| electrical connection | male connector M12, 4 pins |
| discrete output type | PNP |
| maximum delay first up | 10 ms |
| status LED | output state: 1 LED (yellow) |
| marking | CE |
| vibration resistance | 25 gn amplitude = +/- 2 mm (f = 10-55 Hz) conforming to IEC 60068-2-6 |
| IP degree of protection | IP67 conforming to IEC 60529, IP69K conforming to DIN 40050 |
| device application | mobile equipment |
| material | metal |
| shock resistance | 50 gn for 11 ms conforming to IEC 60068-2-27 |
| detection face | frontal |
| series name | general purpose |
| supply voltage limits | 10-58 V DC |
| enclosure material | nickel plated brass |
| thread type | M30 x 1.5 |
| length | 74 mm |
| switching frequency | <= 500 Hz |
| switching capacity in mA | <= 200 mA DC with overload and short-circuit protection |
| sensing range | > 8...15 mm |
| differential travel | 1...15% of Sr |
| discrete output function | 1 NC |
| type of output signal | discrete |
| [Sn] nominal sensing distance | 15 mm |
| detector flush mounting acceptance | flush mountable |
| operating zone | 0-12 mm |
| maximum voltage drop | <2 V (closed) |
| threaded length | 52 mm |
| front material | PPS |
| sensor name | XS6 |
| output circuit type | DC |
| size | 74 mm |