Osisense XS & XT inductive sensor XS6 M8 - L51mm - stainless - Sn2.5mm - 12..48VDC - cable 2m - XS608B1PAL2
This XS cylindrical (M8 thread) inductive proximity sensor has a PPS sensing face and a stainless steel grade 303 case.
It has a supply voltage of 12V to 48V DC.
This general purpose threaded cylindrical inductive proximity sensor is flush mountable and has an increased sensing range.
It is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts.
Non-magnetic 303 stainless steel provides magnetic shielding to the sensor, better accuracy and immunity to magnetic disturbance.
It has an annular LED for easy sensor status viewing, setup and troubleshooting.
IP65 and IP67 protection makes this product ready for the harshest environments.
It can operate in very cold (-25°C) and hot environments (+70°C).
It features double insulation for better people and system protection from electrical shocks.
It is CSA, UL certified.
| Attribute | Value |
|---|---|
| SKU | XS608B1PAL2 |
| product certifications | CSA, UL |
| ambient air temperature for storage | -40-85 °C |
| ambient air temperature for operation | -25-70 °C |
| Cable length | 2 m |
| body type | fixed |
| maximum delay response | 0.2 ms |
| maximum delay recovery | 0.2 ms |
| sensor type | inductive proximity sensor |
| sensor design | cylindrical M8 |
| wiring technique | 3-wire |
| range of product | Telemecanique Inductive proximity sensors XS |
| product or component type | Detektor / Sensor |
| current consumption | <= 10 mA no-load |
| net weight | 0.035 kg |
| range | Proximity |
| [Us] rated supply voltage | 12...48 V DC with reverse polarity protection |
| electrical connection | cable |
| discrete output type | PNP |
| maximum delay first up | 10 ms |
| status LED | output state: 1 LED (yellow) |
| marking | CE |
| vibration resistance | 25 gn amplitude = +/- 2 mm (f = 10-55 Hz) conforming to IEC 60068-2-6 |
| IP degree of protection | IP67 conforming to IEC 60529 |
| material | stainless steel |
| shock resistance | 50 gn for 11 ms conforming to IEC 60068-2-27 |
| detection face | frontal |
| series name | general purpose |
| supply voltage limits | 10-58 V DC |
| enclosure material | stainless steel 303 |
| thread type | M8 x 1 |
| length | 51 mm |
| switching frequency | <= 2500 Hz |
| switching capacity in mA | <= 200 mA DC with overload and short-circuit protection |
| sensing range | > 0...2.5 mm |
| differential travel | 1...15% of Sr |
| discrete output function | 1 NO |
| type of output signal | discrete |
| [Sn] nominal sensing distance | 2.5 mm |
| detector flush mounting acceptance | flush mountable |
| operating zone | 0-2 mm |
| maximum voltage drop | <2 V (closed) |
| wire insulation material | PvR |
| threaded length | 42 mm |
| cable composition | 3 x 0.11 mm² |
| front material | PPS |
| sensor name | XS6 |
| output circuit type | DC |
| size | 51 mm |