Osisense XS & XT inductive sensor XS7 40x40x117 - PBT - Sn15 mm - 24..240VAC/DC - terminals - XS7C4A1MPG13
The XS range is an offer of inductive proximity sensors for the detection, without physical contact, of metal objects.
The advantages of inductive detection are numerous, no physical contact with the object to be detected.
Thus avoiding wear and enabling detection of fragile or freshly painted objects.
High operating rates.
Fast response.
Excellent resistance to industrial environments (robust products, fully encapsulated in resin).
This product is a 40mm x 40mm x 117mm format sensor, flush mountable in metal.
It features a plastic case with a plug-in 5 position turret head and a PG 13.5 cable entry.
It has a sensing distance of 15mm.
Two-wire, AC or DC supply, unprotected, 24V to 240V, NO or NC function programmable.
This sensor must be protected by a 0.4A quick-blow fuse, reference XUZE04, connected in series with the load.
| Attribute | Value |
|---|---|
| SKU | XS7C4A1MPG13 |
| product certifications | CCC, CSA, UL |
| ambient air temperature for storage | -40-85 °C |
| ambient air temperature for operation | -25-70 °C |
| body type | fixed |
| maximum delay response | 1.2 ms |
| maximum delay recovery | 1.8 ms |
| sensor type | inductive proximity sensor |
| sensor design | form 40 x 40 x 117 |
| wiring technique | 2-wire |
| range of product | Telemecanique Inductive proximity sensors XS |
| product or component type | Detektor / Sensor |
| net weight | 0.244 kg |
| range | Proximity |
| [Us] rated supply voltage | 24...240 V AC 50/60 Hz, 24...240 V DC |
| electrical connection | screw-clamp terminals, 4 x 1.5 mm² |
| repeat accuracy | <= 3% of Sr |
| maximum delay first up | 7.5 ms |
| height | 40 mm |
| status LED | output state: 1 LED (yellow), supply on: 1 LED (green) |
| marking | CE |
| width | 117 mm |
| vibration resistance | 25 gn amplitude = +/- 2 mm (f = 10-55 Hz) conforming to IEC 60068-2-6 |
| IP degree of protection | IP65 conforming to IEC 60529, IP67 conforming to IEC 60529, IP69K conforming to DIN 40050 |
| device application | - |
| maximum residual current | 1.5 mA open state 120 V, 0.6 mA open state 24 V |
| material | plastic |
| shock resistance | 50 gn for 11 ms conforming to EN 60068-2-27 |
| detection face | 5 positions turret head |
| series name | general purpose |
| supply voltage limits | 20-264 V AC/DC |
| enclosure material | PBT |
| length | 40 mm |
| switching frequency | <= 25 Hz AC, <= 50 Hz DC |
| switching capacity in mA | 5...200 mA DC, 5...300 mA AC |
| sensing range | > 8...15 mm |
| differential travel | 3...15% of Sr |
| discrete output function | 1 NO or 1 NC programmable |
| type of output signal | discrete |
| [Sn] nominal sensing distance | 15 mm |
| detector flush mounting acceptance | flush mountable |
| operating zone | 0-12 mm |
| maximum voltage drop | <5.5 V (closed) |
| front material | PBT |
| sensor name | XS7 |
| output circuit type | AC/DC |
| size | 117 mm |
| cable entry number | 1 tapped entry for Pg 13.5 cable gland |