Schneider Electric
Osisense XS & XT inductive sensor XSAV - M30 - Sn10mm - 120..3000c/mn - 24..240VAC/DC - cable 2m - XSAV12801
Out of stock
SKU
XSAV12801
Details
This sensor provides an economical solution for detecting slip, belt breakage, drive shaft shear and overloading.
Dedicated to rotation monitoring, it is suitable for conveyor belts, bucket elevators and Archemedian screws.
And also for grinders, crushers, pumps, centrifugal driers, mixers, etc.
This product is a cylindrical, flush mountable metal sensor, diameter 30mm, threaded M30 x 1.5.
It features a cylindrical metal case and a 2m long cable.
It has a sensing distance of 10mm.
Its adjustable frequency range is 120 impluses/min to 3000 impluses/min.
Two-wire, AC/DC (24V to 240VAC or 24V to 210VDC), 1 NC discrete output.
More Information
| Attribute | Value |
|---|---|
| SKU | XSAV12801 |
| product certifications | CCC, CSA, UL |
| ambient air temperature for storage | -40-85 °C |
| ambient air temperature for operation | -25-70 °C |
| Cable length | 2 m |
| body type | fixed |
| sensor type | inductive proximity sensor |
| sensor design | cylindrical M30 |
| wiring technique | 2-wire |
| range of product | Telemecanique Inductive proximity sensors XS |
| product or component type | Detektor / Sensor |
| net weight | 0.3 kg |
| range | Proximity |
| [Us] rated supply voltage | 24...240 V AC 50/60 Hz, 24...210 V DC |
| electrical connection | cable |
| repeat accuracy | 3% of Sr |
| status LED | output state: 1 LED (red) |
| marking | CE |
| IP degree of protection | IP67 conforming to IEC 60529 |
| device application | rotation monitoring |
| maximum residual current | 1.5 mA open state |
| material | metal |
| detection face | frontal |
| series name | Application |
| supply voltage limits | 20-264 V AC/DC |
| enclosure material | nickel plated brass |
| thread type | M30 x 1.5 |
| length | 81 mm |
| switching frequency | <= 800 Hz |
| switching capacity in mA | 5...200 mA DC, 5...350 mA AC |
| sensing range | > 8...15 mm |
| differential travel | 3...15% of Fr |
| discrete output function | 1 NC |
| type of output signal | discrete |
| [Sn] nominal sensing distance | 10 mm |
| detector flush mounting acceptance | flush mountable |
| operating zone | 0-8 mm |
| maximum voltage drop | <5.7 V (closed) |
| wire insulation material | PvR |
| threaded length | 67 mm |
| cable composition | 2 x 0.34 mm² |
| front material | PPS |
| sensor name | XSA |
| output circuit type | AC/DC |
| size | 81 mm |
| run-up delay at power-up | 9 s standard |
| adjustable frequency range | 120-3000 cyc/mn |
Technical Documents