Osisense XS & XT inductive sensor XSAV - M30 - Sn10mm - 6..150c/mn - 24..240VAC/DC - cable 2m - XSAV11801
This cylindrical diameter 30 mm threaded M30 x 1.5 flush mountable sensor is part of XS range, an offer of inductive proximity sensors for the detection, without physical contact, of metal objects.
The advantages of inductive detection are numerous, no physical contact with the object to be detected, thus avoiding wear and enabling detection of fragile or freshly painted objects.
High operating rates.
Fast response.
Excellent resistance to industrial environments (robust products).
It features a nickel plated brass case and a 2m long cable.
It has a sensing distance of 10mm, two-wire, AC/DC supply, 24 to 240 V AC 50/60 Hz or 24 to 210 V DC , NC function output.
These self-contained rotation speed monitoring sensors have the special feature of incorporating, in the same case, the pulse sensing and processing electronics as well as the output switching amplifier.
That are required to establish an integrated rotation monitoring device.
The unit provides an economical solution for detecting slip, belt breakage, drive shaft shear and overloading, etc.
In the following applications, conveyor belts, bucket elevators, Archemedian screws, grinders, crushers, pumps, centrifugal driers, mixers, etc.
| Attribute | Value |
|---|---|
| SKU | XSAV11801 |
| product certifications | CCC, CSA, UL |
| ambient air temperature for storage | -40-85 °C |
| ambient air temperature for operation | -25-70 °C |
| Cable length | 2 m |
| body type | fixed |
| sensor type | inductive proximity sensor |
| sensor design | cylindrical M30 |
| wiring technique | 2-wire |
| range of product | Telemecanique Inductive proximity sensors XS |
| product or component type | Detektor / Sensor |
| net weight | 0.3 kg |
| range | Proximity |
| [Us] rated supply voltage | 24...240 V AC 50/60 Hz, 24...210 V DC |
| electrical connection | cable |
| repeat accuracy | 3% of Sr |
| status LED | output state: 1 LED (red) |
| marking | CE |
| IP degree of protection | IP67 conforming to IEC 60529 |
| device application | rotation monitoring |
| maximum residual current | 1.5 mA open state |
| material | metal |
| detection face | frontal |
| series name | Application |
| supply voltage limits | 20-264 V AC/DC |
| enclosure material | nickel plated brass |
| thread type | M30 x 1.5 |
| length | 81 mm |
| switching frequency | <= 100 Hz |
| switching capacity in mA | 5...200 mA DC, 5...350 mA AC |
| sensing range | > 8...15 mm |
| differential travel | 3...15% of Fr |
| discrete output function | 1 NC |
| type of output signal | discrete |
| [Sn] nominal sensing distance | 10 mm |
| detector flush mounting acceptance | flush mountable |
| operating zone | 0-8 mm |
| maximum voltage drop | <5.7 V (closed) |
| wire insulation material | PvR |
| threaded length | 67 mm |
| cable composition | 2 x 0.34 mm² |
| front material | PPS |
| sensor name | XSA |
| output circuit type | AC/DC |
| size | 81 mm |
| run-up delay at power-up | 9 s standard |
| adjustable frequency range | 6-150 cyc/mn |