Schneider Electric
OsiSense XU photo-electric sensor - XUK - receiver - Sn 30m - 12..24VDC - cable 2m - XUK2APBNL2R
Out of stock
SKU
XUK2APBNL2R
Details
This compact design single mode (thru-beam system) photo-electric receiver has a PBT case.
It has a supply voltage of 12V to 24V DC.
This mono-mode rectangular photoelectric receiver has a plastic body, is mountable directly on a surface or bracket, thanks to its 3 fixing points.
It has VALOX® PBT high strength case ideal for high temperature environments and PMMA scratch-resistant lens for maximum sensor durability.
1 LED display allows to identify status of the sensor.
IP65 protection makes this product ready for the harshest environments.
It can operate in very cold (-25°C) and hot environments (+55°C).
It provides double insulation for better people and system protection from electrical shocks.
It is CSA and UL certified.
More Information
| Attribute | Value |
|---|---|
| SKU | XUK2APBNL2R |
| product certifications | CSA, UL, CE |
| ambient air temperature for storage | -40-70 °C |
| ambient air temperature for operation | -25-55 °C |
| Cable length | 2 m |
| maximum delay response | 2 ms |
| maximum delay recovery | 2 ms |
| sensor design | compact 50 x 50 |
| wiring technique | 3-wire |
| range of product | Telemecanique Photoelectric sensors XU |
| product or component type | Detektor / Sensor |
| current consumption | <= 35 mA no-load |
| range | Photoelectric |
| [Us] rated supply voltage | 12...24 V DC with reverse polarity protection |
| electrical connection | cable |
| discrete output type | PNP |
| maximum delay first up | 15 ms |
| maximum sensing distance | 45 m thru beam |
| setting-up | without sensitivity adjustment |
| emission | infrared thru beam |
| detection system | thru beam |
| output type | solid state |
| height | 50 mm |
| status LED | 1 LED (yellow) for output state |
| width | 18 mm |
| depth | 50 mm |
| vibration resistance | 7 gn, amplitude = +/- 1.5 mm (f = 10-55 Hz) conforming to IEC 60068-2-6 |
| IP degree of protection | IP65 double insulation conforming to IEC 60529 |
| material | plastic |
| shock resistance | 30 gn (duration = 11 ms) conforming to IEC 60068-2-27 |
| series name | general purpose single mode |
| supply voltage limits | 10-36 V DC |
| enclosure material | PBT |
| product specific application | - |
| switching frequency | <= 250 Hz |
| switching capacity in mA | <= 100 mA (overload and short-circuit protection) |
| sensing range | > 15...30 m |
| discrete output function | 1 NC |
| type of output signal | discrete |
| [Sn] nominal sensing distance | 30-30 m thru beam need a transmitter XUK2AKSNL2T |
| maximum voltage drop | <1.5 V (closed state) |
| wire insulation material | PVC |
| sensor name | XUK |
| lens material | PMMA |
| supply circuit type | DC |
| electronic sensor type | photo-electric sensor receiver |
| add on output | without |
Technical Documents