Schneider Electric
OsiSense XX ultrasonic sensor cylindrical M30 - Sn 1 m - 2NO - M12 connector - XX630A1KAM12
Out of stock
SKU
XX630A1KAM12
Details
This cylindrical (diffuse system) ultrasonic sensor has a ULTEM case.
It has a supply voltage of 12V to 24V DC.
This general purpose cylindrical ultrasonic sensor, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts.
ULTEM® high strength case makes it ideal for high temperature environments.
Multi-LED display allows to identify status of the sensor, to facilitate setup and troubleshooting.
IP67 protection makes this product ready for the harshest environments.
It can operate in hot environments up to +60°C.
It has a standard M12 connector, compatible with all existing market sensor cabling.
It is IEC 60947-5-2 compliant.
More Information
| Attribute | Value |
|---|---|
| SKU | XX630A1KAM12 |
| product certifications | UL, cCSAus |
| ambient air temperature for storage | -40-80 °C |
| ambient air temperature for operation | 0-60 °C |
| resistance to electrostatic discharge | 8 kV level 4 conforming to IEC 61000-4-2 |
| maximum delay response | 20 ms |
| maximum delay recovery | 20 ms |
| sensor type | ultrasonic sensor |
| sensor design | cylindrical M30 |
| wiring technique | 4-wire |
| range of product | Telemecanique Ultrasonic sensors XX |
| product or component type | Detektor / Sensor |
| current consumption | 50 mA |
| net weight | 0.091 kg |
| standards | IEC 60947-5-2 |
| range | Proximity |
| [Us] rated supply voltage | 12...24 V DC with reverse polarity protection |
| electrical connection | male connector M12 4 pins |
| repeat accuracy | 0.9 % |
| discrete output type | PNP and NPN |
| maximum delay first up | 720 ms |
| detection system | diffuse |
| transmission frequency | 200 kHz |
| [Sd] sensing range | 0.051-0.991 m |
| height | 35 mm |
| status LED | setting-up assistance: 1 LED (green/red (flashing)) |
| marking | CE |
| width | 35 mm |
| depth | 85 mm |
| vibration resistance | +/-1 mm conforming to IEC 60068-2-6 (f = 10-55 Hz) |
| IP degree of protection | IP67 conforming to IEC 60529 |
| material | plastic |
| shock resistance | 30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27 |
| function available | without synchronisation mode |
| series name | general purpose |
| supply voltage limits | 10-28 V DC |
| enclosure material | ULTEM |
| thread type | M30 x 1.5 |
| resistance to electromagnetic fields | 10 V/m level 3 conforming to IEC 61000-4-3 |
| resistance to fast transients | 1 kV level 3 conforming to IEC 61000-4-4 |
| maximum switching current | 100 mA with overload and short-circuit protection |
| switching frequency | <= 10 Hz |
| discrete output function | 2 NO |
| type of output signal | discrete |
| [Sn] nominal sensing distance | 1-1 m adjustable with teach push-button |
| maximum voltage drop | 1 V |
| threaded length | 45 mm |
| front material | silicone |
| sensor name | XX6 |
| deviation angle from 90° of object to be detected | -7-7 ° |
| beam angle | 10 ° |
| minimum size of detected object | cylinder diameter 1.6 mm at 0.635 m |
| [Sa] assured operating distance | 0.051-0.991 m (teach mode) |
| blind zone | 0-51 mm |
| maximum differential travel | 2.5 mm |
Technical Documents
