Phaseo ABL8 regulated SMPS - 3-phase - 380..500 V AC - 24 V - 20 A - ABL8WPS24200
This ABL8 regulated switch mode power supply (SMPS) supplies direct current voltage.
It has a rated input of 380V to 500V AC, a rated output current of 20A at 24V DC and a rated power output of 480W.
It is ideal for supplying DC voltage necessary for automation equipment designed for applications in industrial, commercial and residential applications such as conveying, packaging, control, food & beverage, mining, oil & gas and water.
Automatic reset allows short-term faults to be cleared and systems to restart without the need to disturb on-duty maintenance engineers.
It has LED diagnostics indicator available in the front for troubleshooting instantly.
It provides a power reserve allowing to deliver a current of 150% its nominal rating for a short time allows handling of simultaneous inrush current when starting a process.
It installs easily on DIN rail and is 95mm-wide.
It is a power supply for industrial use, rail mounting.
It conforms to CSA C22.2 No 60950-1 and UL 508.
It is certified with CCSAus, EAC, UL and RCM.
The GV2ME06 thermal magnetic circuit breaker is recommanded for its protection.
It has LED diagnostics indicator available in the front for troubleshooting instantly.
It installs on DIN rail.
It brings energy to your automated systems.
Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.
| Attribute | Value |
|---|---|
| SKU | ABL8WPS24200 |
| product certifications | EAC, UL, RCM, cCSAus |
| relative humidity | 0-90 % during operation, 0-95 % in storage |
| ambient air temperature for storage | -40-70 °C |
| ambient air temperature for operation | 50-60 °C (with derating factor), -25-50 °C (without) |
| environmental characteristic | EMC conforming to EN 61000-6-1, EMC conforming to EN 61000-6-3, EMC conforming to EN 55024, EMC conforming to EN/IEC 61000-6-4, EMC conforming to EN/IEC 61204-3, safety conforming to EN/IEC 60950-1, safety conforming to SELV, safety conforming to EN 61204-4 |
| anti-harmonic filter | low frequency harmonic currents |
| input voltage | 380...500 V AC three phase, terminal(s): L1, L2, L3 |
| output voltage | 24 V DC |
| range of product | Modicon Power Supply |
| power supply output current | 20 A |
| rated power in W | 480 W |
| operating position | vertical |
| product or component type | Relay & Power Supply |
| net weight | 1.6 kg |
| standards | UL 508, CSA C22.2 No 60950-1 |
| range | Power Supply |
| output coupling | series, parallel |
| connections - terminals | removable screw terminal block: 2 x 2.5 mm², for diagnostic relay, screw type terminals: 3 x 0.5...3 x 4 mm², (AWG 22...AWG 12) for input connection, screw type terminals: 1 x 0.5...1 x 4 mm², (AWG 22...AWG 12) for input ground connection, screw type terminals: 4 x 0.5...4 x 10 mm², (AWG 22...AWG 8) for output connection |
| output protection type | against overload, protection technology: manual or automatic reset, against overvoltage, protection technology: 30...32 V, manual reset, against short-circuits, protection technology: manual or automatic reset, against undervoltage, protection technology: tripping if U < 21.6 V, thermal, protection technology: automatic reset |
| height | 143 mm |
| power dissipation in W | 38.4 W |
| status LED | 1 LED (green and red)output voltage, 1 LED (green, red and orange)output current |
| output voltage limits | 24...28.8 V adjustable |
| mounting support | 35 x 7.5 mm symmetrical DIN rail, 35 x 15 mm symmetrical DIN rail |
| compatibility code | ABL8W |
| efficiency | 92 % |
| marking | CE |
| width | 96 mm |
| depth | 160 mm |
| power supply type | regulated switch mode |
| inrush current | 25 A |
| input voltage limits | 320...550 V AC |
| operating altitude | 2000 m |
| dielectric strength | 3500 V between input and ground, 4000 V between input and output, 500 V between output and ground |
| IP degree of protection | IP20 conforming to EN/IEC 60529 |
| provided equipment | power factor correction filter conforming to IEC 61000-3-2 |
| power factor | 0.65 at 24 V DC |
| permissible temporary current boost | 1.5 x In (for 4 s) |
