PowerTag Acti9 Monoconnect 1P+N Bottom position Max 63A Energy Sensor - A9MEM1522
This PowerTag Energy M63 1P+N Bottom is a wireless communication energy sensor.
It is dedicated to Acti9 and Multi9 1P+N Monoconnect devices with 18mm pitch between phase and neutral, rating less than or equal 63A.
It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level.
It is designed specifically for Energy Management, Load Monitoring and Power Availability applications.
It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor.
In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized.
PowerTag Energy 63A complies with IEC 61557-12 standard.
It is a PMD-I/DD/K55/1.
The Performance category is Class 1.
The Imax Maximum current is 63A.
The Ib Base current is 10A.
The Saturation current is 130A.
The Ist Starting current is 40mA.
The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%.
The maximum consumption is below or equal to 1VA.
It can be only mounted on the bottom of the protective device.
The product color is white (RAL9003).
The weight is 17,5g.
The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C.
The Storage temperature is between -40°C to +85°C.
| Attribute | Value |
|---|---|
| SKU | A9MEM1522 |
| relative humidity | 0-95 % at 45-45 °C conforming to IEC 60721-3-3 |
| ambient air temperature for storage | -40-85 °C |
| overvoltage category | III conforming to IEC 61010-1 |
| pollution degree | 3 |
| ambient air temperature for operation | -25-60 °C |
| environmental characteristic | indoor use, dustproof class 3S3 conforming to IEC 60721-3-3, salt mist class 3C2 conforming to IEC 60721-3-3 |
| quality labels | CE |
| cable cross section | 1 rigid cable 1.5-16 mm², 2 stranded cable 1.5-2.5 mm², 2 rigid cable 1.5-2.5 mm², 1 stranded cable 1.5-16 mm² |
| product or component type | Meter & Manajemen Energi |
| net weight | 17.5 g |
| mounting mode | by screws (terminals) |
| standards | IEC 61557-12, IEC 61010-1, IEC 61010-2-030, IEC 61326-1, ETSI EN 300 328 |
| range | PowerTag |
| range compatibility | Acti 9 Reflex iC60, Acti 9 iK60, Acti 9 iID, Acti 9 iID K, Multi 9 C60, Acti 9 iC65, Acti 9 iKQE RCBO, Multi 9 ID, Multi 9 C32N, Multi 9 C65, Acti 9 iKQ, Acti 9 K60, Acti 9 DT60, Acti 9 iC60 single terminal |
| IK degree of protection | IK05 |
| product name | PowerTag A9 M63 |
| type of measurement | voltage, current, power factor, active energy, active power |
| measurement category | category III conforming to IEC 61010-2-030 |
| electrical connection | connector tooth |
| starting current | 40 mA |
| transmission support medium | radio frequency 2.4-2.4835 GHz conforming to IEEE 802.15.4 |
| saturation current | 130 A |
| form factor | monoconnect |
| maximum emission power | 10 mW |
| Concentrator compatibility | Acti9 PowerTag Link C, Acti9 PowerTag Link, Acti9 PowerTag Link HD, Acti9 Smartlink SI B, Acti9 Smartlink SI D |
| Event management | voltage loss with measured current at voltage loss |
| [Ib] basic current | 10 A |
| network frequency | 50 Hz, 60 Hz |
| height | 16.5 mm |
| mounting support | on circuit breaker |
| compatibility code | PowerTag A9 M63 |
| width | 36 mm |
| depth | 43 mm |
| vibration resistance | 3M4 conforming to IEC 60721-3-3 |
| operating altitude | 0...2000 m |
| IP degree of protection | IP20 conforming to IEC 60529 |
| poles description | 1P + N |
| colour | white (RAL 9003) |
| [Ue] rated operational voltage | 200...240 V AC, +/- 20 % |
| product destination | switchboard |
| market segment | buildings: breaker voltage monitoring, buildings: cost allocation, buildings: overload alarm |
| maximum power consumption in VA | 1 VA |
| accuracy class | class 1 active energy conforming to IEC 61557-12, class 1 active power conforming to IEC 61557-12, class 1 current conforming to IEC 61557-12, class 0.5 voltage conforming to IEC 61557-12, class 1 power factor conforming to IEC 61557-12 |
| product specific application | energy management, overload alarm, load monitoring, circuit monitoring, cost allocation |
| mounting location | bottom |
| directives | 2014/53/EU - radio equipment directive |
| max current | 63 A |
