Preventa XY2C e-stop rope pull switch XY2CE - LH side -1NC+1NO - booted pushbutton - XY2CE2A250
This XY2CE Emergency Stop Rope pull Switch is designed with a left hand side anchor point, allowing operator to trigger the stop of potentially dangerous machines at any point of its working area.
It operates with a maximum rope length of 70 meters.
It has a Zamak body with a booted pushbutton reset, Nitrile bellows, no pilot light, and 1 normally open and 1 normally closed slow break contacts.
Its B10D reliability data is 300 000.
This emergency stop rope pull switch is suitable for woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops, surface treatment works, etc.
Its IP66 degree of protection makes it ideal for heavy duty use in harsh conditions.
It also complies with EN/IEC 60204-1, EN/IEC 60947-5-1, EN/IEC 60947-5-5, EN/ISO 13850, UL NISD, CSA C22.2 No 14-13 standards.
When associated and correctly connected to an appropriate safety control unit, it conforms to category 4, performance level PL e, SIL 3 as described in EN/ISO 13849-1, EN/IEC 61508.
| Attribute | Value |
|---|---|
| SKU | XY2CE2A250 |
| product certifications | CCC, CSA, UL category NISD emergency stop devices |
| ambient air temperature for storage | -40-70 °C |
| overvoltage category | class I conforming to EN/IEC 61140, class I conforming to NF C 20-030 |
| ambient air temperature for operation | -25-70 °C |
| number of cables | 1 |
| reset | by booted push-button |
| safety reliability data | B10d = 300000 conforming to IEC 60947-5-5 value given for a life time of 20 years limited by mechanical or contact wear |
| terminals description ISO n°1 | (13-14)NO, (21-22)NC |
| range of product | Telemecanique Emergency stop rope pull switches XY2C |
| product or component type | Detektor / Sensor |
| net weight | 1.45 kg |
| standards | CSA C22.2 No 14, UL 508, EN/IEC 60947-5-1, EN/IEC 60204-1, EN/ISO 13850, EN/IEC 60947-5-5, work equipment directive 2009/104/EC, machinery directive 2006/42/EC |
| mechanical durability | 60000 cycles |
| device short name | XY2CE |
| range | Limit Switch |
| [Ie] rated operational current | 3 A at 240 V, AC-15, A300 conforming to EN/IEC 60947-5-1 appendix A, 0.27 A at 250 V, DC-13, Q300 conforming to EN/IEC 60947-5-1 appendix A |
| short-circuit protection | 10 A cartridge fuse type gG conforming to EN/IEC 60269 |
| contact operation | slow-break |
| positive opening | with conforming to EN/IEC 60947-5-1 |
| connections - terminals | screw clamp terminal, 1 x 0.5...2 x 1.5 mm² |
| compatibility code | XY2CE |
| marking | CE |
| vibration resistance | 10 gn (f= 10-300 Hz) conforming to EN/IEC 60068-2-6 |
| IP degree of protection | IP66 conforming to IEC 60529 |
| tightening torque | 0.8-1.2 N.m |
| local signalling | without pilot light |
| [Ui] rated insulation voltage | 300 V conforming to UL 508, 300 V conforming to CSA C22.2 No 14, 500 V (pollution degree 3) conforming to EN/IEC 60947-1 |
| protective treatment | TC |
| contacts type and composition | 1 NC + 1 NO |
| shock resistance | 50 gn 11 ms conforming to EN/IEC 60068-2-27 |
| [Ithe] conventional enclosed thermal current | 10 A |
| maximum resistance across terminals | 25 mOhm conforming to NF C 93-050 method A, 25 MOhm conforming to EN/IEC 60255-7 category 3 |
| body material | zamak |
| cable entry number | 3 plain hole for Pg 13.5 or ISO M20 cable gland |
| safety level | can reach PL = e with the appropriate monitoring system and correctly wired conforming to EN/ISO 13849-1, can reach category 4 with the appropriate monitoring system and correctly wired conforming to EN/ISO 13849-1, can reach SIL 3 with the appropriate monitoring system and correctly wired conforming to EN/IEC 61508 |
| trigger cable maximum length | 70 m |
| housing colour | red RAL 3000 |
| distance between cable supports | 5-5 m |
| trigger cable anchor point | LH side |
| cover material | stainless steel |
