Preventa XY2C e-stop rope pull switch XY2CE - LH side - 2NC+2NO - pilot light 230V - boot. pb - XY2CE2A297
This product is part of the XY2C range, an offer of emergency stop rope pull switches.
This emergency stop rope pull switch has 2 normally closed + 2 normally opened, slow-break contacts with positive opening operation.
It is a switch with a rated operational current of 0.27A at 250V AC, 3A at 240V AC and a conventional enclosed thermal current of 10A.
It is furnished with screw clamp terminals for electrical connection and 3 plain hole for PG13.5 or ISO M20 cable gland.
The trigger cable anchor point at left hand side.
It can reset by booted pushbutton.
It offers long mechanical durability which is about 60000 operating cycles.
It is an IP66 rated product.
The casing is made of Zamak (red) with stainless steel cover.
It weighs 1.47kg.
It is intended for all machine applications like woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops, surface treatment works, etc.
This product is certified by CCC, CSA and UL.
It meets CSA C22.2 No 14, EN/ISO 13850, EN/IEC 60947-5-1, EN/IEC 60204-1, EN/IEC 60947-5-5, UL 508 Machinery directive 2006/42/EC and Work equipment directive 2009/104/EC standards.
These emergency stop rope pull switches can be equipped with trip indicators, cable tension adjustment can be performed using a turnbuckle.
The emergency stop rope pull switch is intended for all machines requiring stopping of dangerous movement in the immediate vicinity of the machine.
The emergency stop rope pull switch is designed to avert hazards (dangerous phenomena) at the earliest possible moment or to reduce risks which could cause injury to persons or damage either to machines or work in progress.
| Attribute | Value |
|---|---|
| SKU | XY2CE2A297 |
| product certifications | CCC, CSA, UL category NISD emergency stop devices |
| ambient air temperature for storage | -40-70 °C |
| overvoltage category | class I conforming to EN/IEC 61140, class I conforming to NF C 20-030 |
| ambient air temperature for operation | -25-70 °C |
| number of cables | 1 |
| reset | by booted push-button |
| safety reliability data | B10d = 300000 conforming to IEC 60947-5-5 value given for a life time of 20 years limited by mechanical or contact wear |
| terminals description ISO n°1 | (13-14)NO, (21-22)NC |
| range of product | Telemecanique Emergency stop rope pull switches XY2C |
| product or component type | Detektor / Sensor |
| net weight | 1.47 kg |
| standards | CSA C22.2 No 14, UL 508, EN/IEC 60947-5-1, EN/IEC 60204-1, EN/ISO 13850, EN/IEC 60947-5-5, work equipment directive 2009/104/EC, machinery directive 2006/42/EC |
| mechanical durability | 60000 cycles |
| device short name | XY2CE |
| range | Limit Switch |
| [Ie] rated operational current | 3 A at 240 V, AC-15, A300 conforming to EN/IEC 60947-5-1 appendix A, 0.27 A at 250 V, DC-13, Q300 conforming to EN/IEC 60947-5-1 appendix A |
| [Us] rated supply voltage | 230...240 V AC |
| short-circuit protection | 10 A cartridge fuse type gG conforming to EN/IEC 60269 |
| contact operation | slow-break |
| positive opening | with conforming to EN/IEC 60947-5-1 |
| connections - terminals | screw clamp terminal, 1 x 0.5...2 x 1.5 mm² |
| compatibility code | XY2CE |
| marking | CE |
| vibration resistance | 10 gn (f= 10-300 Hz) conforming to EN/IEC 60068-2-6 |
| IP degree of protection | IP66 conforming to IEC 60529 |
| tightening torque | 0.8-1.2 N.m |
| local signalling | with pilot light, yellow, 230 V |
| [Ui] rated insulation voltage | 400 V (pollution degree 3) conforming to EN/IEC 60947-1, 300 V conforming to UL 508, 300 V conforming to CSA C22.2 No 14 |
| protective treatment | TC |
| contacts type and composition | 2 NC + 2 NO |
| shock resistance | 50 gn 11 ms conforming to EN/IEC 60068-2-27 |
| [Ithe] conventional enclosed thermal current | 10 A |
| maximum resistance across terminals | 25 mOhm conforming to NF C 93-050 method A, 25 MOhm conforming to EN/IEC 60255-7 category 3 |
| body material | zamak |
| cable entry number | 3 plain hole for Pg 13.5 or ISO M20 cable gland |
| light block supply | direct |
| safety level | can reach PL = e with the appropriate monitoring system and correctly wired conforming to EN/ISO 13849-1, can reach category 4 with the appropriate monitoring system and correctly wired conforming to EN/ISO 13849-1, can reach SIL 3 with the appropriate monitoring system and correctly wired conforming to EN/IEC 61508 |
| trigger cable maximum length | 70 m |
| housing colour | red RAL 3000 |
| distance between cable supports | 5-5 m |
| trigger cable anchor point | LH side |
| cover material | stainless steel |
