Schneider Electric
VarPlus Can HDuty Capacitor - 40/48 kvar - 525 V - 50/60Hz - BLRCH400A480B52
In stock
SKU
BLRCH400A480B52
Details
VarPlus Can capacitor are a reliable and flexible solution for power factor correction in stringent operating conditions.
These capacitors are particularly used for higher voltage disturbances or when a few non-linear loads are present.
The rated Current of the capacitors must be in increased in order to cope with the circulation of the harmonic current.
This capacitor provides a rated output power of 40 kVar at 525V AC,50 Hz.
Fastening assured by a ClampTite terminal.
This component meet the standards IEC 60831-1 and IEC 60831-2.
The case product weight is 4.1 kg.
More Information
| Attribute | Value |
|---|---|
| SKU | BLRCH400A480B52 |
| relative humidity | 95-95 % |
| ambient air temperature for operation | -25-55 °C |
| rated voltage | 525-525 V AC 50/60 Hz |
| range of product | VarPlus Can |
| product or component type | Koreksi Faktor Daya |
| net weight | 4.1 kg |
| mounting mode | upright/horizontal |
| standards | IEC 60831-1, IEC 60831-2 |
| range | Kapasitor |
| dielectric material | metallized polypropylene film with Zn/Al alloy, special resistivity & profile, special edge (wave cut) |
| network frequency | 50/60 Hz |
| connections - terminals | stud terminals |
| height | 321 mm |
| inrush current | 250 x In |
| operating altitude | 2000 m |
| IP degree of protection | IP00 |
| type of installation | indoor installation |
| series name | HDuty |
| reactive power rating | 40 kvar 525 V 50 Hz, 48 kvar 525 V 60 Hz |
| diameter | 116 mm |
| capacitance tolerance | - 5 % to 10 % |
| maximum switching operation per year | 7000 |
| service life in hours | 130000 h |
| network harmonic content | <= 20 % |
| maximum permissible voltage | 1.1 x Un (8 hours over 24 hours) |
| impregnation material | non-PCB dry PUR resin, biodegradable |
| voltage test | 2.15 x Un AC between terminals for 10 s, <= 660 V - 3 kV AC between terminal and container for 10 s, >= 660 V - 6 kV AC between terminal and container for 10 s |
| dielectric losses | < 0.2 W/kvar |
| [Imp] maximum permanent current | 1.8 x In |
| temperature class | D |
| power losses | < 0.5 W/kVAr |
Technical Documents