Schneider Electric
Zelio RPM - Relay power plug-in relay - 3 C/O - 230 V AC - 15 A - with LED - RPM32P7
Out of stock
SKU
RPM32P7
Details
This Zelio RPM power plug-in relay has a coil control voltage of 230V AC and has 3 changeover contacts 3PDT (triple pole double throw) with a rating of 15A.
It has large choice of number of contacts for high rated current use.
It also offers LED indicator to alert on the current status of the relay.
It helps to reduce the size of enclosures and increase machine reliability: you can mount nearly everywhere.
This RPM product is IP40.
Workablity for hard-wired logic automated systems to complement the functions of industrial progammable logic controllers (PLCs).
Status display with LED: clearly signal both in the day and night.
More Information
| Attribute | Value |
|---|---|
| SKU | RPM32P7 |
| product certifications | EAC, CSA, UL |
| ambient air temperature for storage | -40-85 °C |
| pollution degree | 3 |
| ambient air temperature for operation | -40-55 °C |
| safety reliability data | B10d = 100000 |
| test levels | level A group mounting |
| range of product | Harmony Relay |
| operating position | any position |
| product or component type | Relay & Power Supply |
| net weight | 0.054 kg |
| standards | CSA C22.2 No 14, UL 508, EN/IEC 61810-1 |
| mechanical durability | 10000000 cycles |
| device short name | RPM |
| range | Plug In Relay |
| [Ie] rated operational current | 15 A at 277 V (AC) conforming to UL, 15 A at 28 V (DC) conforming to UL, 15 A at 250 V (AC) NO conforming to IEC, 15 A at 28 V (DC) NO conforming to IEC, 7.5 A at 250 V (AC) NC conforming to IEC, 7.5 A at 28 V (DC) NC conforming to IEC |
| [Uc] control circuit voltage | 230 V AC |
| [Uimp] rated impulse withstand voltage | 4 kV during 1.2/50 µs |
| contacts material | AgNi |
| operating time | 20 ms at nominal voltage |
| status LED | with |
| compatibility code | RPM |
| vibration resistance | 3 gn, amplitude = +/- 1 mm (f = 10-150 Hz)5 cycles in operation, 5 gn, amplitude = +/- 1 mm (f = 10-150 Hz)5 cycles not operating |
| dielectric strength | 1500 V AC between contacts with micro disconnection, 2000 V AC between coil and contact with reinforced, 2000 V AC between poles with basic |
| IP degree of protection | IP40 conforming to EN/IEC 60529 |
| electrical durability | 100000 cycles for resistive load |
| control type | lockable test button |
| device presentation | complete product |
| [Ui] rated insulation voltage | 250 V conforming to IEC, 300 V conforming to CSA, 300 V conforming to UL |
| contacts type and composition | 3 C/O |
| shock resistance | 30 gn for not operating, 15 gn for in operation |
| utilisation coefficient | 20 % |
| maximum switching capacity | 3750 VA, 420 W |
| series name | Power |
| rated operational voltage limits | 184...253 V AC |
| operating rate | <= 1200 cycles/hour under load, <= 18000 cycles/hour no-load |
| protection category | RT I |
| reset time | 20 ms at nominal voltage |
| shape of pin | flat |
| load current | 15 A at 250 V AC, 15 A at 28 V DC |
| drop-out voltage threshold | >= 0.15 Uc AC |
| minimum switching capacity | 170 mW at 10 mA, 17 V |
| [Ithe] conventional enclosed thermal current | 15 A at -40-55 °C |
| maximum switching voltage | 250 V conforming to IEC |
| average resistance | 9600 Ohm at 20 °C +/- 15 % |
| average coil consumption in VA | 1.7 at 60 Hz |
